@phdthesis{Wattebled2006,
  author    = {Wattebled, Laurent},
  title     = {Oligomeric surfactants as novel type of amphiphiles : structure - property relationships and behaviour with additives},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12855},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {The properties of a series of well-defined new surfactant oligomers (dimers to tetramers)were examined. From a molecular point of view, these oligomeric surfactants consist of simple monomeric cationic surfactant fragments coupled via the hydrophilic ammonium chloride head groups by spacer groups (different in nature and length). Properties of these cationic surfactant oligomers in aqueous solution such as solubility, micellization and surface activity, micellar size and aggregation number were discussed with respect to the two new molecular variables introduced, i.e. degree of oligomerization and spacer group, in order to establish structure - property relationships. Thus, increasing the degree of oligomerization results in a pronounced decrease of the critical micellization concentration (CMC). Both reduced spacer length and increased spacer hydrophobicity lead to a decrease of the CMC, but to a lesser extent. For these particular compounds, the formed micelles are relatively small and their aggregation number decreases with increasing the degree of oligomerization, increasing spacer length and sterical hindrance. In addition, pseudo-phase diagrams were established for the dimeric surfactants in more complex systems, namely inverse microemulsions, demonstrating again the important influence of the spacer group on the surfactant behaviour. Furthermore, the influence of additives on the property profile of the dimeric compounds was examined, in order to see if the solution properties can be improved while using less material. Strong synergistic effects were observed by adding special organic salts (e.g. sodium salicylate, sodium vinyl benzoate, etc.) to the surfactant dimers in stoichiometric amounts. For such mixtures, the critical aggregation concentration is strongly shifted to lower concentration, the effect being more pronounced for dimers than for analogous monomers. A sharp decrease of the surface tension can also be attained. Many of the organic anions produce viscoelastic solutions when added to the relatively short-chain dimers in aqueous solution, as evidenced by rheological measurements. This behaviour reflects the formation of entangled wormlike micelles due to strong interactions of the anions with the cationic surfactants, decreasing the curvature of the micellar aggregates. It is found that the associative behaviour is enhanced by dimerization. For a given counterion, the spacer group may also induce a stronger viscosifying effect depending on its length and hydrophobicity. Oppositely charged surfactants were combined with the cationic dimers, too. First, some mixtures with the conventional anionic surfactant SDS revealed vesicular aggregates in solution. Also, in view of these catanionic mixtures, a novel anionic dimeric surfactant based on EDTA was synthesized and studied. The synthesis route is relatively simple and the compound exhibits particularly appealing properties such as low CMC and σCMC values, good solubilization capacity of hydrophobic probes and high tolerance to hard water. Noteworthy, mixtures with particular cationic dimers gave rise to viscous solutions, reflecting the micelle growth.},
  language  = {en}
}
@phdthesis{Hildebrandt2006,
  author    = {Hildebrandt, Niko},
  title     = {Lanthanides and quantum dots : time-resolved laser spectroscopy of biochemical F{\"o}rster Resonance Energy Transfer (FRET) systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12686},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {F{\"o}rster Resonance Energy Transfer (FRET) plays an important role for biochemical applications such as DNA sequencing, intracellular protein-protein interactions, molecular binding studies, in vitro diagnostics and many others. For qualitative and quantitative analysis, FRET systems are usually assembled through molecular recognition of biomolecules conjugated with donor and acceptor luminophores. Lanthanide (Ln) complexes, as well as semiconductor quantum dot nanocrystals (QD), possess unique photophysical properties that make them especially suitable for applied FRET. In this work the possibility of using QD as very efficient FRET acceptors in combination with Ln complexes as donors in biochemical systems is demonstrated. The necessary theoretical and practical background of FRET, Ln complexes, QD and the applied biochemical models is outlined. In addition, scientific as well as commercial applications are presented. FRET can be used to measure structural changes or dynamics at distances ranging from approximately 1 to 10 nm. The very strong and well characterized binding process between streptavidin (Strep) and biotin (Biot) is used as a biomolecular model system. A FRET system is established by Strep conjugation with the Ln complexes and QD biotinylation. Three Ln complexes (one with Tb3+ and two with Eu3+ as central ion) are used as FRET donors. Besides the QD two further acceptors, the luminescent crosslinked protein allophycocyanin (APC) and a commercial fluorescence dye (DY633), are investigated for direct comparison. FRET is demonstrated for all donor-acceptor pairs by acceptor emission sensitization and a more than 1000-fold increase of the luminescence decay time in the case of QD reaching the hundred microsecond regime. Detailed photophysical characterization of donors and acceptors permits analysis of the bioconjugates and calculation of the FRET parameters. Extremely large F{\"o}rster radii of more than 100 {\AA} are achieved for QD as acceptors, considerably larger than for APC and DY633 (ca. 80 and 60 {\AA}). Special attention is paid to interactions with different additives in aqueous solutions, namely borate buffer, bovine serum albumin (BSA), sodium azide and potassium fluoride (KF). A more than 10-fold limit of detection (LOD) decrease compared to the extensively characterized and frequently used donor-acceptor pair of Europium tris(bipyridine) (Eu-TBP) and APC is demonstrated for the FRET system, consisting of the Tb complex and QD. A sub-picomolar LOD for QD is achieved with this system in azide free borate buffer (pH 8.3) containing 2 \% BSA and 0.5 M KF. In order to transfer the Strep-Biot model system to a real-life in vitro diagnostic application, two kinds of imunnoassays are investigated using human chorionic gonadotropin (HCG) as analyte. HCG itself, as well as two monoclonal anti-HCG mouse-IgG (immunoglobulin G) antibodies are labeled with the Tb complex and QD, respectively. Although no sufficient evidence for FRET can be found for a sandwich assay, FRET becomes obvious in a direct HCG-IgG assay showing the feasibility of using the Ln-QD donor-acceptor pair as highly sensitive analytical tool for in vitro diagnostics.},
  language  = {en}
}
@phdthesis{Mauser2006,
  author    = {Mauser, Tatjana},
  title     = {Multilayer capsules with stimuli-sensitive properties : pH-response and carbohydrate-sensing},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12529},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Polyelectrolyte microcapsules containing stimuli-responsive polymers have potential applications in the fields of sensors or actuators, stimulable microcontainers and controlled drug delivery. Such capsules were prepared, with the focus on pH-sensitivity and carbohydrate-sensing. First, pH-responsive polyelectrolyte capsules were produced by means of electrostatic layer-by-layer assembly of oppositely charged weak polyelectrolytes onto colloidal templates that were subsequently removed. The capsules were composed of poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) or poly(4-vinylpyridine) (P4VP) and PMA and varied considerably in their hydrophobicity and the influence of secondary interactions. These polymers were assembled onto CaCO3 and SiO2 particles with diameters of ~ 5 µm, and a new method for the removal of the silica template under mild conditions was proposed. The pH-dependent stability of PAH/PMA and P4VP/PMA capsules was studied by confocal laser scanning microscopy (CLSM). They were stable over a wide pH-range and exhibited a pronounced swelling at the edges of stability, which was attributed to uncompensated positive or negative charges within the multilayers. The swollen state could be stabilized when the electrostatic repulsion was counteracted by hydrogen-bonding, hydrophobic interactions or polymeric entanglement. This stabilization made it possible to reversibly swell and shrink the capsules by tuning the pH of the solution. The pH-dependent ionization degree of PMA was used to modulate the binding of calcium ions. In addition to the pH-sensitivity, the stability and the swelling degree of these capsules at a given pH could be modified, when the ionic strength of the medium was altered. The reversible swelling was accompanied by reversible permeability changes for low and high molecular weight substances. The permeability for glucose was evaluated by studying the time-dependence of the buckling of the capsule walls in glucose solutions and the reversible permeability modulation was used for the encapsulation of polymeric material. A theoretical model was proposed to explain the pH-dependent size variations that took into account an osmotic expanding force and an elastic restoring force to evaluate the pH-dependent size changes of weak polyelectrolyte capsules. Second, sugar-sensitive multilayers were assembled using the reversible covalent ester formation between the polysaccharide mannan and phenylboronic acid moieties that were grafted onto poly(acrylic acid) (PAA). The resulting multilayer films were sensitive to several carbohydrates, showing the highest sensitivity to fructose. The response to carbohydrates resulted from the competitive binding of small molecular weight sugars and mannan to the boronic acid groups within the film, and was observed as a fast dissolution of the multilayers, when they were brought into contact with the sugar-containing solution above a critical concentration. It was also possible to prepare carbohydrate-sensitive multilayer capsules, and their sugar-dependent stability was investigated by following the release of encapsulated rhodamine-labeled bovine serum albumin (TRITC-BSA).},
  language  = {en}
}
@misc{DoscheMicklerLoehmannsroebenetal.2007,
  author    = {Dosche, Carsten and Mickler, Wulfhard and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Agenet, Nicolas and Vollhardt, K. Peter C.},
  title     = {Photoinduced electron transfer in [N]phenylenes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12463},
  year      = {2007},
  abstract  = {First studies of electron transfer in [N]phenylenes were performed in bimolecular quenching reactions of angular [3]- and triangular [4]phenylene with various electron acceptors. The relation between the quenching rate constants kq and the free energy change of the electron transfer (ΔG0CS ) could be described by the Rehm-Weller equation. From the experimental results, a reorganization energy λ of 0.7 eV was derived. Intramolecular electron transfer reactions were studied in an [N]phenylene bichomophore and a corresponding reference compound. Fluorescence lifetime and quantum yield of the bichromophor display a characteristic dependence on the solvent polarity, whereas the corresponding values of the reference compound remain constant. From the results, a nearly isoenergonic ΔG0CS can be determined. As the triplet quantum yield is nearly independent of the polarity, charge recombination leads to the population of the triplet state.},
  language  = {en}
}
@misc{BrendlerBechmann2005,
  author    = {Brendler, Christian and Bechmann, Wolfgang},
  title     = {Pestizideinsatz gegen die Rosskastanien-Miniermotte (Cameraria ohridella) im Stadtgebiet Potsdam},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12366},
  year      = {2005},
  abstract  = {In Deutschland hat sich in den letzten zehn Jahren die aus dem Balkan eingewanderte Rosskastanien-Miniermotte verbreitet; sie richtet vor allem in Ballungsgebieten an der weiß bl{\"u}henden Rosskastanie starke Sch{\"a}den an. Neben der vollst{\"a}ndigen mechanischen Beseitigung und Entsorgung des Falllaubes im Herbst eignen sich zur Bek{\"a}mpfung chemische Pflanzenschutzmittel. In Potsdam sind 2001 und 2003 an zwei Standorten befallene Rosskastanien versuchsweise mit zwei unterschiedlichen Pestiziden erfolgreich behandelt worden. 2005 wurden die Standorte beprobt und die Bodenproben auf R{\"u}ckst{\"a}nde der verwendeten Mittel untersucht. TerraTech m{\"o}chte Kommunen mit vergleichbarem Problem Hinweise auf Bek{\"a}mpfungsmethoden geben, ver{\"o}ffentlicht diesen Beitrag aber vor allem unter dem Gesichtspunkt des Boden- und Grundwasserschutzes.},
  language  = {de}
}
@misc{EngelbrechtLauSalffneretal.2006,
  author    = {Engelbrecht, Rainer and Lau, Steffen and Salffner, Katharina and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
  title     = {Fasergekoppelte NIR-Diodenlaser-Spektrometer zur simultanen und isotopen-aufgel{\"o}sten Messung von CO und CO2 : Anwendungen in Plasma-Diagnostik und Bodengasanalyse},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12348},
  year      = {2006},
  abstract  = {Die Anwendung zweier {\"a}hnlicher fasergekoppelte Diodenlaser-Spektrometer-Systeme werden vorgestellt. Basis sind handels{\"u}bliche DFB-Laserdioden der optischen Kommunikationstechnik. Der faseroptische Aufbau, das Detektionsverfahren (2f Wellenl{\"a}ngenmodulations-Spektroskopie mit Balanced Receiver), Rauschverhalten und Detektionslimit werden diskutiert. Zur in-situ Plasma-Diagnostik von CO- und CO2-Konzentrationen in industriellen CO2-Lasern der Materialbearbeitung wurde eine Wellenl{\"a}nge von 1582 nm verwendet. Bei einem Gasdruck von 100 hPa und einer Absorptionswegl{\"a}nge von 14,9 cm wurden mit einer Laserdiode simultan CO- und CO2-Konzentrationen von 0\% bis 11\% im Gasgef{\"a}ß bei laufender Hochfrequenzgasentladung des CO2-Lasers zeitaufgel{\"o}st gemessen. Vorgestellt und diskutiert werden Aufbau und Eigenschaften des Spektrometers sowie die Ergebnisse der dynamischen Gasanalysen, die zu einer Verbesserung der Katalysator-Technik im CO2-Laser beigetragen haben.Mit isotopenaufgel{\"o}ster CO- und CO2-Spektroskopie k{\"o}nnen biologische Gasaustauschprozesse, z.B. in Gasen aus dem Erdboden untersucht werden. Hierzu wurde ein fasergekoppeltes feldtaugliches Diodenlaser-Spektrometer bei Wellenl{\"a}ngen um 1605 nm zur Messungder Isotopologe 12C16O, 13C16O, 12C18O und 12C16O2, 13C16O2, 12C18O16O aufgebaut. Die Messung erfolgt extraktiv in Langwegzellen mit unterschiedlichen Absorptionswegl{\"a}ngen von 100.9 m und 29.9 m. Es werden Kalibrationsmessungen zur Linearit{\"a}t und zur Pr{\"a}zision der Bestimmung der Isotopenverh{\"a}ltnisse sowie Wiederholungsmessungen zur Stabilit{\"a}t vorgestellt. Nachweisgrenzen von wenigen ppm konnten f{\"u}r die CO- und CO2-Isotopologen erhalten werden.},
  language  = {de}
}
@misc{KumkeEidner2005,
  author    = {Kumke, Michael Uwe and Eidner, Sascha},
  title     = {Fluorescence and energy transfer processes of humic substances and related model compounds in terbium complexes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12255},
  year      = {2005},
  abstract  = {The fluorescence properties and the fluorescence quenching by Tb3+ of substituted benzoic acid were investigated in solution at different pH. The substituted benzoic acids were used as simple model compounds for chromophores present in humic substances (HS). It is shown that the fluorescence properties of the model compounds resemble fluorescence of HS quite well. A major factor determining the fluorescence of model compounds are proton transfer reactions in the electronically excited state. It is intriguing that the fluorescence of the model compounds was almost not quenched by Tb3+ while the HS fluorescence was decreased very effectively. From our results we concluded that proton transfer reactions as well as conformational reorientation processes play an important role in the fluorescence of HS. The luminescence of bound Tb3+ was sensitized by an energy transfer step upon excitation of the model compounds and of HS, respectively. For HS the observed sensitization was dependent on its origin indicating differences 1) in the connection between chromophores and binding sites and 2) in the energy levels of the chromophore triplet states. Hence, the observed sensitization of the Tb3+ luminescence could be useful to characterize structural differences of HS in solution. Interlanthanide energy transfer between Tb3+ and Nd3+ was used to determine the average distance R between both ions using the well-known formalism of luminescence resonance energy transfer. R was dependent on the origin of the HS reflecting the difference in structure. The value of Rmin seemed to be a unique feature of the HS. It was further found that upon variation of the pH R also changed. This demonstrates that the measurement of interlanthanide energy transfer can be used as a direct method to monitor conformational changes in HS.},
  language  = {en}
}
@phdthesis{Note2006,
  author    = {Note, Carine},
  title     = {Influence of hydrophobically modified polyelectrolytes on nanoparticle synthesis in self-organized systems and in water},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-11670},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {The formation of colloids by the controlled reduction, nucleation, and growth of inorganic precursor salts in different media has been investigated for more than a century. Recently, the preparation of ultrafine particles has received much attention since they can offer highly promising and novel options for a wide range of technical applications (nanotechnology, electrooptical devices, pharmaceutics, etc). The interest derives from the well-known fact that properties of advanced materials are critically dependent on the microstructure of the sample. Control of size, size distribution and morphology of the individual grains or crystallites is of the utmost importance in order to obtain the material characteristics desired. Several methods can be employed for the synthesis of nanoparticles. On the one hand, the reduction can occur in diluted aqueous or alcoholic solutions. On the other hand, the reduction process can be realized in a template phase, e.g. in well-defined microemulsion droplets. However, the stability of the nanoparticles formed mainly depends on their surface charge and it can be influenced with some added protective components. Quite different types of polymers, including polyelectrolytes and amphiphilic block copolymers, can for instance be used as protecting agents. The reduction and stabilization of metal colloids in aqueous solution by adding self-synthesized hydrophobically modified polyelectrolytes were studied in much more details. The polymers used are hydrophobically modified derivatives of poly(sodium acrylate) and of maleamic acid copolymers as well as the commercially available branched poly(ethyleneimine). The first notable result is that the polyelectrolytes used can act alone as both reducing and stabilizing agent for the preparation of gold nanoparticles. The investigation was then focused on the influence of the hydrophobic substitution of the polymer backbone on the reduction and stabilization processes. First of all, the polymers were added at room temperature and the reduction process was investigated over a longer time period (up to 8 days). In comparison, the reduction process was realized faster at higher temperature, i.e. 100°C. In both cases metal nanoparticles of colloidal dimensions can be produced. However, the size and shape of the individual nanoparticles mainly depends on the polymer added and the temperature procedure used. In a second part, the influence of the prior mentioned polyelectrolytes was investigated on the phase behaviour as well as on the properties of the inverse micellar region (L2 phase) of quaternary systems consisting of a surfactant, toluene-pentanol (1:1) and water. The majority of the present work has been made with the anionic surfactant sodium dodecylsulfate (SDS) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) since they can interact with the oppositely charged polyelectrolytes and the microemulsions formed using these surfactants present a large water-in-oil region. Subsequently, the polymer-modified microemulsions were used as new templates for the synthesis of inorganic particles, ranging from metals to complex crystallites, of very small size. The water droplets can indeed act as nanoreactors for the nucleation and growth of the particles, and the added polymer can influence the droplet size, the droplet-droplet interactions, as well as the stability of the surfactant film by the formation of polymer-surfactant complexes. One further advantage of the polymer-modified microemulsions is the possibility to stabilize the primary formed nanoparticles via a polymer adsorption (steric and/or electrostatic stabilization). Thus, the polyelectrolyte-modified nanoparticles formed can be redispersed without flocculation after solvent evaporation.},
  subject      = {Mikroemulsion},
  language  = {en}
}
@phdthesis{Peikow2006,
  author    = {Peikow, Dirk},
  title     = {Synthese und Glycosidasehemmung von Thio-analogen Kohlenhydraten},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-11192},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Chitin ist ein Polysaccharid, welches aus N-Acetylglucosamin (GlcNAc) aufgebaut ist. Das Biopolymer kommt in der Natur in Invertebraten, Algen, Pilzen und Einzellern vor. Chitinasen hydrolysieren Chitin. Diese Enzyme sind essentiell f{\"u}r die Regulierung und Entwicklung von Arthropoden und Mikroorganismen. Sie fungieren in Pflanzen als Phytoalexine. Das verst{\"a}rkt das Interesse am Design neuer nat{\"u}rlicher und synthetischer Chitinase-inhibitoren, die als potentielle Insektizide, Fungizide, Antimalaria bzw. Antiasthmatika eingesetzt werden k{\"o}nnen. Ziel dieser Arbeit war die Synthese von neuen Thioglycosidanaloga von N-Acetyl-chitooligosacchariden und deren Untersuchung als Enzyminhibitoren. Die gesch{\"u}tzten 4-O-Tf-galactopyranosylthioglycoside wurden aus den korrespondierenden p-Methoxyphenylglycosiden von GlcNAc nach einer neuen Methode in einer Stufe hergestellt. Die Reaktion der galacto-Triflate mit 2-Acetamido-3,4,6-tri-O-acetyl-2-desoxy-1-thio-ß-D-glucopyranose in Gegenwart von Natriumhydrid und 15-Krone-5 in THF lieferte die Pseudo-Trisaccharide. Die Herstellung der Glycosyl-Thiazoline aus den entsprechenden p-Methoxyphenyl-glycosiden mit Lawesson's Reagenz ist nach einem neuen Reaktionsweg beschrieben wie auch die Synthese der Thioacetamide von GlcNAc-Oligomeren. Die Pseudo-Oligosaccharide wurden als Inhibitoren der Chitinasen von Serratia marcescens, Chironomus tentans, Acanthocheilonema viteae und Hevaea brasiliensis sowie der N-Acetyl-glucosaminidase von Chironomus tentans getestet. In einigen F{\"a}llen ergab sich eine Hemmung (IC50) im µM-Bereich.},
  language  = {de}
}
@phdthesis{Meyer2006,
  author    = {Meyer, Matthias},
  title     = {PIPOX-PEP : kontrollierte Synthese und Aggregationsverhalten von Blockcopolymeren mit schaltbarer Hydrophilie},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10832},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Es wurden Poly(2-isopropyl-2-oxazolin)-Makroinitiatoren mit terminaler Ammoniumtrifluoracetat-Endgruppe synthetisiert, die anschließend f{\"u}r die Ammonium vermittelte NCA Polymerisation in NMP eingesetzt wurden. Die hierbei synthetisierten Poly(2-isopropyl-2-oxazolin)-block-poly(L-glutamat) (PIPOX-PEP) Blockcopolymere hatten eine Molekulargewichtsverteilung von 1,2 (UZ). Es wurde beobachtet, dass Poly(2-isopropyl-2-oxazolin) bei langen Zeiten oberhalb der LCST irreversibel sph{\"a}rische Strukturen bildet, die eine hierarchische Struktur besitzen und bei denen es sich m{\"o}glicherweise um "large compound micelles" handelt. PIPOX-PEP kann in w{\"a}sseriger L{\"o}sung bei langen Zeiten oberhalb der LCST "cottonball" Strukturen bilden. Die Aggregate wurden mittels Lichtstreuung, NMR und TEM charakterisiert. Im Rahmen der Arbeit wurden Strukturbildungsmodelle entwickelt.},
  subject      = {Polymer},
  language  = {de}
}