@phdthesis{Schilde1992,
  author    = {Schilde, Uwe},
  title     = {Zur Abtrennung von Oxoanionen mittels chelatbildender Ionenaustauscher},
  pages     = {III, 181 Bl. : graph. Darst. + Thesen (1 Ex.)},
  year      = {1992},
  language  = {de}
}
@article{MondalBehrensKellingetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Kelling, Alexandra and Nabein, Hans-Peter and Schilde, Uwe and Holdt, Hans-J{\"u}rgen},
  title     = {Two Cd-II/Co-II-Imidazolate Coordination Polymers: Syntheses, Crystal Structures, Stabilities, and Luminescent/Magnetic Properties},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  volume    = {641},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0044-2313},
  doi       = {10.1002/zaac.201500526},
  pages     = {1991 -- 1997},
  year      = {2015},
  abstract  = {Cadmium(II) based 2D coordination polymer [Cd(L1)(2)(DMF)(2)] (1) (L1 = 4,5-dicyano-2-methylimidazolate, DMF = N,N'-dimethylformamide) and 2D cobalt(II)-imidazolate framework [Co(L3)(4)] (2) (L3 = 4,5-diamide-2-ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction measurement (PXRD) and single-crystal X-ray diffraction. Compound 1 has hexacoordinate Cd-II ions and forms a zigzag chain-like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 degrees C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co-II atom.},
  language  = {en}
}
@article{LeeHwangSchildeetal.2018,
  author    = {Lee, Hui-Chun and Hwang, Jongkook and Schilde, Uwe and Antonietti, Markus and Matyjaszewski, Krzysztof and Schmidt, Bernhard V. K. J.},
  title     = {Toward ultimate control of radical polymerization},
  series = {Chemistry of materials : a publication of the American Chemical Society},
  volume    = {30},
  journal   = {Chemistry of materials : a publication of the American Chemical Society},
  number    = {9},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0897-4756},
  doi       = {10.1021/acs.chemmater.8b00546},
  pages     = {2983 -- 2994},
  year      = {2018},
  abstract  = {Herein, an approach via combination of confined porous textures and reversible deactivation radical polymerization techniques is proposed to advance synthetic polymer chemistry, i.e., a connection of metal-organic frameworks (MOFs) and activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). Zn-2(benzene-1,4-dicarboxylate)2(1,4-diazabicyclo[2.2.2]-octane) [Zn-2(bdc)(2)(dabco)] is utilized as a reaction environment for polymerization of various methacrylate monomers (methyl, ethyl, benzyl, and isobornyl methacrylate) in a confined nanochannel, resulting in polymers with control over dispersity, end functionalities, and tacticity with respect to distinct molecular size. To refine and reconsolidate the compartmentation effect on polymer regularity, initiator-functionalized Zn MOF was synthesized via cocrystallization with an initiator-functionalized ligand, 2-(2-bromo-2-methylpropanamido)-1,4-benzenedicarboxylate (Brbdc), in different ratios (10\%, 20\%, and 50\%). Through the embedded initiator, surface-initiated ARGET ATRP was directly initiated from the walls of the nanochannels. The obtained polymers had a high molecular weight up to 392 000. Moreover, a significant improvement in end-group functionality and stereocontrol was observed, entailing polymers with obvious increments in isotacticity. The results highlight a combination of MOFs and ATRP that is a promising and universal methodology to prepare various polymers with high molecular weight exhibiting well-defined uniformity in chain length and microstructure as well as the preserved chain-end functionality.},
  language  = {en}
}
@article{UhlemannKraudeltSchildeetal.1996,
  author    = {Uhlemann, Erhard and Kraudelt, Heide and Schilde, Uwe and Hefele, Heike and Ludwig, Eberhard},
  title     = {Titan- und Vanadiumkomplexe mit 4-[1-[N'-Benzoyl-hydrazino)-1-phenyl-methyliden]-3-methyl-1-phenyl- pyrazol-5-on : R{\"o}ntgenkristallstruktur von 4-[1- (N-Benzoyl-hydrazino)-1-phenyl-methyl-methyliden]-3-methyl-1- phenyl-pyrazol-5-on},
  year      = {1996},
  language  = {de}
}
@article{RudershausenDrexlerBansseetal.2007,
  author    = {Rudershausen, S. and Drexler, Hans-Joachim and Banße, Wolfgang and Kelling, Alexandra and Schilde, Uwe and Holdt, Hans-Joachim},
  title     = {Three polymorphs of bis(5-methylthio-1,2-dithiole-3-thione)-disulfide},
  doi       = {10.1002/crat.200610776},
  year      = {2007},
  abstract  = {The title compound, bis(5-methylthio-1,2-dithiole-3-thione)-disulfide, was yielded for the first time as by- product of the reaction of nickel(II) and cobalt(II) ions with 5-methylthio-1,2-dithiole-3-thione-4-thiolate. The compound can be obtained directly by oxidation of the ammonium salt of the ligand. C8H6S10 forms three polymorphs: (I), which crystallizes in the orthorhombic space group P212121, (II) and (III), which crystallize in the monoclinic space groups P21/c and P21/n, respectively. The crystal and molecular structures are presented here. The determination of the absolute configuration of (I) indicated the P-helical enantiomer. In contrast to this, the crystals of (II) und (III) are racemic, containing P- and M-helical enantiomers. The polymorphs differ in the kind of skewing around the disulfide bond and of the positions of the both dithiole rings to the S-S-moiety},
  language  = {en}
}
@article{ShainyanUshakovMeshcheryakovetal.2007,
  author    = {Shainyan, Bagrat A. and Ushakov, Igor A. and Meshcheryakov, Vladimir I. and Schilde, Uwe and Koch, Andreas and Kleinpeter, Erich},
  title     = {The stereodynamics of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane and 1,3,5- tris(trifluoromethylsulfonyl)-1,3,5-triazinane- an experimental and theoretical study},
  doi       = {10.1016/j.tet.2007.09.041},
  year      = {2007},
  abstract  = {Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.},
  language  = {en}
}
@article{SchmidtWernerKellingetal.2010,
  author    = {Schmidt, Bernd and Werner, Frank and Kelling, Alexandra and Schilde, Uwe},
  title     = {The reaction of 3,4-dihydro-2H-pyran with oxalyl chloride : formation and crystal structure analysis of an unexpected bicyclic product},
  issn      = {0022-152X},
  year      = {2010},
  abstract  = {3,4-Dihydro-2-H-pyran and oxalyl chloride react, depending on the conditions, to keto esters, a pyran-3- carboxylic acid or derivatives thereof, or to an hitherto unknown bicyclic acetal containing a vinyl chloride moiety. The structure of the latter product has been unambiguously elucidated by single-crystal X-ray structure analysis. A mechanism for its formation is proposed.},
  language  = {en}
}
@article{KruseHeydenreichEngstetal.2005,
  author    = {Kruse, Hans-Peter and Heydenreich, Matthias and Engst, W. and Schilde, Uwe and Kroll, J{\"u}rgen},
  title     = {The identification of 1,3-oxazolidine-2-thiones and 1,3-thiazolidine-2-thiones from the reaction of glucose with benzyl isothiocyanate},
  issn      = {0008-6215},
  year      = {2005},
  abstract  = {The structure of interaction products resulting from the reaction of unmodified glucose with benzyl isothiocyanate is reported. Prior to their identification, the main products of this reaction were isolated using solid- phase extraction (SPE) as well as preparative HPLC. They were then identified by NMR and MS as 3-benzyl-4-hydroxy-5-(D- arabino-1,2,3,4-tetrahydroxybutyl)- 1,3-oxazolidine-2-thione, 3-benzyl-4-hydroxy-4-hydroxymethyl-5-(D-erythro-1,2,3- trihydroxypropyl)- 1,3-oxazolidine-2-thione, N-benzyl-(D-gluco-4,5-dihydroxy-6-hydroxymethyl-tetrahydropyrano)[2,3-b] oxazolidine-2-thione and 3-benzyl-4-(N-benzyl amino)-5-(D-arabino-1,2,3,4-tetrahydroxybutyl)-1,3-thiazolidine-2-thione . The identity of the last compound was secured by X-ray crystal structure data. (C) 2004 Elsevier Ltd. All rights reserved},
  language  = {en}
}
@article{SchildePoleschner1996,
  author    = {Schilde, Uwe and Poleschner, Helmut},
  title     = {The first structure of a vicinal (E)-Fluoroselenoolefin: (E)-(5-Fluoro-4-octen-4-yl)dimethylselenonium Picrate},
  year      = {1996},
  language  = {en}
}
@article{HoldtMuellerPotteretal.2006,
  author    = {Holdt, Hans-J{\"u}rgen and M{\"u}ller, Holger and Potter, Matthias and Kelling, Alexandra and Schilde, Uwe and Starke, Ines and Heydenreich, Matthias and Kleinpeter, Erich},
  title     = {The first sandwich complex with an octa(thioether) coordination sphere : Bis(maleonitrile-tetrathia-12-crown- 4)silver(I)},
  issn      = {1434-1948},
  doi       = {10.1002/ejic.200501109},
  year      = {2006},
  abstract  = {The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).},
  language  = {en}
}