@article{AdebayoHashimHassetal.2017, author = {Adebayo, Segun Emmanuel and Hashim, Norhashila and Hass, Roland and Reich, Oliver and Regen, Christian and M{\"u}nzberg, Marvin and Abdan, Khalina and Hanafi, Marsyita and Zude-Sasse, Manuela}, title = {Using absorption and reduced scattering coefficients for non-destructive analyses of fruit flesh firmness and soluble solids content in pear}, series = {Postharvest Biology and Technology}, volume = {130}, journal = {Postharvest Biology and Technology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0925-5214}, doi = {10.1016/j.postharvbio.2017.04.004}, pages = {56 -- 63}, year = {2017}, abstract = {Quality attributes of fruit determine its acceptability by the retailer and consumer. The objective of this work was to investigate the potential of absorption (μa) and reduced scattering (μs') coefficients of European pear to analyze its fruit flesh firmness and soluble solids content (SSC). The absolute reference values, μa* (cm-1) and μs'* (cm-1), of pear were invasively measured, employing multi-spectral photon density wave (PDW) spectroscopy at preselected wavelengths of 515, 690, and 940 nm considering two batches of unripe and overripe fruit. On eight measuring dates during fruit development, μa and μs' were analyzed non-destructively by means of laser light backscattering imaging (LLBI) at similar wavelengths of 532, 660, and 830 nm by means of fitting according to Farrell's diffusion theory, using fix reference values of either μa* or μs'*. Both, the μa* and the μa as well as μs'* and μs' showed similar trends. Considering the non-destructively measured data during fruit development, μa at 660 nm decreased 91 till 141 days after full bloom (dafb) from 1.49 cm-1 to 0.74 cm-1 due to chlorophyll degradation. At 830 nm, μa only slightly decreased from 0.41 cm-1 to 0.35 cm-1. The μs' at all wavelengths revealed a decreasing trend as the fruit developed. The difference measured at 532 nm was most pronounced decreasing from 24 cm-1 to 10 cm-1, while at 660 nm and 830 nm values decreased from 15 cm-1 to 13 cm-1 and from 10 cm-1 to 8 cm-1, respectively. When building calibration models with partial least-squares regression analysis on the optical properties for non-destructive analysis of the fruit SSC, μa at 532 nm and 830 nm resulted in a correlation coefficient of R = 0.66, however, showing high measuring uncertainty. The combination of all three wavelengths gave an enhanced, encouraging R = 0.89 for firmness analysis using μs' in the freshly picked fruit.}, language = {en} } @article{BresselMuellerLeseretal.2020, author = {Bressel, Katharina and M{\"u}ller, Wenke and Leser, Martin Erwin and Reich, Oliver and Hass, Roland and Wooster, Tim J.}, title = {Depletion-induced flocculation of concentrated emulsions probed by photon density wave spectroscopy}, series = {Langmuir}, volume = {36}, journal = {Langmuir}, number = {13}, publisher = {American Chemical Society}, address = {Washington}, issn = {0743-7463}, doi = {10.1021/acs.langmuir.9b03642}, pages = {3504 -- 3513}, year = {2020}, abstract = {Stable, creaming-free oil in water emulsions with high volume fractions of oil (phi = 0.05-0.40, density matched to water) and polysorbate 80 as an emulsifier were characterized without dilution by Photon Density Wave spectroscopy measuring light absorption and scattering behavior, the latter serving as the basis for droplet size distribution analysis. The emulsion with phi = 0.10 was used to investigate flocculation processes induced by xanthan as a semi-flexible linear nonabsorbing polymer. Different time regimes in the development of the reduced scattering coefficient mu(s)' could be identified. First, a rapid, temperature-dependent change in mu(s)' during the depletion process was observed. Second, the further decrease of mu(s)' follows a power law in analogy to a spinodal demixing behavior, as described by the Cahn-Hilliard theory.}, language = {en} } @article{BresselHassReich2013, author = {Bressel, Lena and Hass, Roland and Reich, O.}, title = {Particle sizing in highly turbid dispersions by Photon Density Wave spectroscopy}, series = {JOURNAL OF QUANTITATIVE SPECTROSCOPY \& RADIATIVE TRANSFER}, volume = {126}, journal = {JOURNAL OF QUANTITATIVE SPECTROSCOPY \& RADIATIVE TRANSFER}, number = {1}, publisher = {PERGAMON-ELSEVIER SCIENCE LTD}, address = {OXFORD}, issn = {0022-4073}, doi = {10.1016/j.jqsrt.2012.11.031}, pages = {122 -- 129}, year = {2013}, abstract = {Photon Density Wave (PDW) spectroscopy is presented as a fascinating technology for the independent determination of scattering (mu(s)\’ and absorption (ita) properties of highly turbid liquid dispersions. The theory is reviewed introducing new expressions for the PDW coefficients k(I) and k(Phi). Furthermore, two models for dependent scattering, namely the hard sphere model in the Percus-Yevick Approximation (HSPYA) and the Yukawa model in the Mean Spherical Approximation (YMSA), are experimentally examined. On the basis of the HSPYA particle sizing is feasible in dispersions of high ionic strength. It is furthermore shown that in dialyzed dispersions or in technical copolymers with high particle charge only the YMSA allows for correct dilution-free particle sizing. (C) 2013 Elsevier Ltd. All rights reserved.}, language = {en} } @article{HaeneBruehwilerEckeretal.2019, author = {Haene, Janick and Bruehwiler, Dominik and Ecker, Achim and Hass, Roland}, title = {Real-time inline monitoring of zeolite synthesis by Photon Density Wave spectroscopy}, series = {Microporous and mesoporous materials : zeolites, clays, carbons and related materials}, volume = {288}, journal = {Microporous and mesoporous materials : zeolites, clays, carbons and related materials}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1387-1811}, doi = {10.1016/j.micromeso.2019.109580}, pages = {6}, year = {2019}, abstract = {The formation process of zeolite A (Linde Type A) was monitored inline at 1.5 L scale by Photon Density Wave (PDW) spectroscopy as novel process analytical technology for highly turbid liquid suspensions. As a result, the reduced scattering coefficient, being a measure for particle number, size, and morphology, provides distinct process information, including the formation of amorphous particles and their transfer into crystalline zeolite structures. The onset and end of the crystallization process can be detected inline and in real-time. Analyses by powder X-ray diffraction and electron microscopy, based on a sampling approach, support the interpretation of the results obtained by PDW spectroscopy. In addition, the influence of the molar water content was investigated, indicating a linear increase of the time needed to reach the end of the zeolite A crystallization with increasing molar water content. Further experiments indicate a strong influence of the silica source on the course of the crystallization. The applicability of PDW spectroscopy under even more demanding chemical and physical conditions was investigated by monitoring the synthesis of zeolite L (Linde Type L).}, language = {en} } @article{HartwigHass2018, author = {Hartwig, Anne and Hass, Roland}, title = {Monitoring lactose crystallization at industrially relevant concentrations by photon density wave spectroscopy}, series = {Chemical engineering \& technology}, volume = {41}, journal = {Chemical engineering \& technology}, number = {6}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0930-7516}, doi = {10.1002/ceat.201700685}, pages = {1139 -- 1146}, year = {2018}, abstract = {Lactose is of great industrial importance and its production includes the cooling crystallization from highly concentrated solutions. Monitoring the crystallization process is essential to ensure reproducible product quality. Photon density wave (PDW) spectroscopy enables in-line monitoring of highly concentrated processes in liquid dispersions. It was applied to the determination of the solubility and nucleation points of lactose monohydrate in water, sizing of lactose crystals, and to dissolution as well as crystallization monitoring. Other process analytical technologies (focused-beam reflectance measurement, particle vision and measurement) were used as reference, and the comparison indicates that PDW spectroscopy is very robust against probe fouling and is, thus, a useful tool for monitoring crystallization processes in concentrated suspensions.}, language = {en} } @phdthesis{Hass2011, author = {Hass, Roland}, title = {Angewandte Photonendichtewellen Spektroskopie}, address = {Potsdam}, pages = {XX, 122, XXXIII S.}, year = {2011}, language = {de} } @article{HassMunzkeReich2010, author = {Hass, Roland and Munzke, Dorit and Reich, Oliver}, title = {Inline-Partikelgroeßenmesstechniken fuer Suspensionen und Emulsionen}, issn = {0009-286X}, doi = {10.1002/cite.200900172}, year = {2010}, abstract = {Die Inline-Bestimmung von Teilchengroeßen in Emulsionen und Suspensionen stellt besondere Anforderungen an die Messtechnik, da auch bei sehr hohen Teilchenkonzentrationen im Prozess verduennungsfreie Analytik betrieben werden soll. Neben einer Klaerung der Begriffe atline, online und in-line gibt der Beitrag eine Einfuehrung in die mathematische Beschreibung von Groeßenverteilungen. Als Inline-Techniken werden Photonendichtewellen-Spektroskopie, Focused Beam Reflectance Measurement und Ultraschallextinktion-Spektroskopie diskutiert und ihre sehr unterschiedlichen physikalischen Messprinzipien erlaeutert. Auch wird kurz erklaert, wie Teilchengroeßen aus den Messresultaten erhalten werden. Die wesentlichen Charakteristika dieser drei Methoden werden abschließend im ueberblick dargestellt.}, language = {de} } @article{HassMunzkeRuizetal.2015, author = {Hass, Roland and Munzke, Dorit and Ruiz, Salome Vargas and Tippmann, Johannes and Reich, Oliver}, title = {Optical monitoring of chemical processes in turbid biogenic liquid dispersions by Photon Density Wave spectroscopy}, series = {Analytical \& bioanalytical chemistry}, volume = {407}, journal = {Analytical \& bioanalytical chemistry}, number = {10}, publisher = {Springer}, address = {Heidelberg}, issn = {1618-2642}, doi = {10.1007/s00216-015-8513-9}, pages = {2791 -- 2802}, year = {2015}, abstract = {In turbid biogenic liquid material, like blood or milk, quantitative optical analysis is often strongly hindered by multiple light scattering resulting from cells, particles, or droplets. Here, optical attenuation is caused by losses due to absorption as well as scattering of light. Fiber-based Photon Density Wave (PDW) spectroscopy is a very promising method for the precise measurement of the optical properties of such materials. They are expressed as absorption and reduced scattering coefficients (mu (a) and mu (s)', respectively) and are linked to the chemical composition and physical properties of the sample. As a process analytical technology, PDW spectroscopy can sense chemical and/or physical processes within such turbid biogenic liquids, providing new scientific insight and process understanding. Here, for the first time, several bioprocesses are analyzed by PDW spectroscopy and the resulting optical coefficients are discussed with respect to established mechanistic models of the chosen processes. As model systems, enzymatic casein coagulation in milk, temperature-induced starch hydrolysis in beer mash, and oxy- as well as deoxygenation of human donor blood were investigated by PDW spectroscopy. The findings indicate that also for very complex biomaterials (i.e., not well-defined model materials like monodisperse polymer dispersions), obtained optical coefficients allow for the assessment of a structure/process relationship and thus for a new analytical access to biogenic liquid material. This is of special relevance as PDW spectroscopy data are obtained without any dilution or calibration, as often found in conventional spectroscopic approaches.}, language = {en} } @article{HassMuenzbergBresseletal.2013, author = {Hass, Roland and M{\"u}nzberg, Marvin and Bressel, Lena and Reich, Oliver}, title = {Industrial applications of photon density wave spectroscopy for in-line particle sizing [Invited]}, series = {Applied optics}, volume = {52}, journal = {Applied optics}, number = {7}, publisher = {Optical Society of America}, address = {Washington}, issn = {1559-128X}, doi = {10.1364/AO.52.001423}, pages = {1423 -- 1431}, year = {2013}, abstract = {Optical spectroscopy in highly turbid liquid material is often restricted by simultaneous occurrence of absorption and scattering of light. Photon Density Wave (PDW) spectroscopy is one of the very few, yet widely unknown, technologies for the independent quantification of these two optical processes. Here, a concise overview about modern PDW spectroscopy is given, including all necessary equations concerning the optical description of the investigated material, dependent light scattering, particle sizing, and PDW spectroscopy itself. Additionally, it is shown how the ambiguity in particle sizing, arising from Mie theory, can be correctly solved. Due to its high temporal resolution, its applicability to highest particle concentrations, and its purely fiber-optical probe, PDW spectroscopy possesses all fundamental characteristics for optical in-line process analysis. Several application examples from the chemical industry are presented. (C) 2013 Optical Society of America}, language = {en} } @article{HassReich2011, author = {Hass, Roland and Reich, Oliver}, title = {Photon density wave spectroscopy for dilution-free sizing of highly concentrated nanoparticles during starved-feed polymerization}, series = {ChemPhysChem : a European journal of chemical physics and physical chemistry}, volume = {12}, journal = {ChemPhysChem : a European journal of chemical physics and physical chemistry}, number = {14}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {1439-4235}, doi = {10.1002/cphc.201100323}, pages = {2572 -- 2575}, year = {2011}, language = {en} }