@article{BekirJelkenJungetal.2021,
  author    = {Bekir, Marek and Jelken, Joachim and Jung, Se-Hyeong and Pich, Andrij and Pacholski, Claudia and Kopyshev, Alexey and Santer, Svetlana},
  title     = {Dual responsiveness of microgels induced by single light stimulus},
  series = {Applied physics letters},
  volume    = {118},
  journal   = {Applied physics letters},
  number    = {9},
  publisher = {American Institute of Physics},
  address   = {Melville},
  issn      = {0003-6951},
  doi       = {10.1063/5.0036376},
  pages     = {6},
  year      = {2021},
  abstract  = {We report on the multiple response of microgels triggered by a single optical stimulus. Under irradiation, the volume of the microgels is reversibly switched by more than 20 times. The irradiation initiates two different processes: photo-isomerization of the photo-sensitive surfactant, which forms a complex with the anionic microgel, rendering it photo-responsive; and local heating due to a thermo-plasmonic effect within the structured gold layer on which the microgel is deposited. The photo-responsivity is related to the reversible accommodation/release of the photo-sensitive surfactant depending on its photo-isomerization state, while the thermo-sensitivity is intrinsically built in. We show that under exposure to green light, the thermo-plasmonic effect generates a local hot spot in the gold layer, resulting in the shrinkage of the microgel. This process competes with the simultaneous photo-induced swelling. Depending on the position of the laser spot, the spatiotemporal control of reversible particle shrinking/swelling with a predefined extent on a per-second base can be implemented.},
  language  = {en}
}
@article{SchuermannNagelJuergensenetal.2022,
  author    = {Sch{\"u}rmann, Robin and Nagel, Alessandro and Juergensen, Sabrina and Pathak, Anisha and Reich, Stephanie and Pacholski, Claudia and Bald, Ilko},
  title     = {Microscopic understanding of reaction rates observed in plasmon chemistry of nanoparticle-ligand systems},
  series = {The journal of physical chemistry : C, Nanomaterials and interfaces},
  volume    = {126},
  journal   = {The journal of physical chemistry : C, Nanomaterials and interfaces},
  number    = {11},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1932-7447},
  doi       = {10.1021/acs.jpcc.2c00278},
  pages     = {5333 -- 5342},
  year      = {2022},
  abstract  = {Surface-enhanced Raman scattering (SERS) is an effective and widely used technique to study chemical reactions induced or catalyzed by plasmonic substrates, since the experimental setup allows us to trigger and track the reaction simultaneously and identify the products. However, on substrates with plasmonic hotspots, the total signal mainly originates from these nanoscopic volumes with high reactivity and the information about the overall consumption remains obscure in SERS measurements. This has important implications; for example, the apparent reaction order in SERS measurements does not correlate with the real reaction order, whereas the apparent reaction rates are proportional to the real reaction rates as demonstrated by finite-difference time-domain (FDTD) simulations. We determined the electric field enhancement distribution of a gold nanoparticle (AuNP) monolayer and calculated the SERS intensities in light-driven reactions in an adsorbed self-assembled molecular monolayer on the AuNP surface. Accordingly, even if a high conversion is observed in SERS due to the high reactivity in the hotspots, most of the adsorbed molecules on the AuNP surface remain unreacted. The theoretical findings are compared with the hot-electron-induced dehalogenation of 4-bromothiophenol, indicating a time dependency of the hot-carrier concentration in plasmon-mediated reactions. To fit the kinetics of plasmon-mediated reactions in plasmonic hotspots, fractal-like kinetics are well suited to account for the inhomogeneity of reactive sites on the substrates, whereas also modified standard kinetics model allows equally well fits. The outcomes of this study are on the one hand essential to derive a mechanistic understanding of reactions on plasmonic substrates by SERS measurements and on the other hand to drive plasmonic reactions with high local precision and facilitate the engineering of chemistry on a nanoscale.},
  language  = {en}
}
@article{PacholskiRosencrantzRosencrantzetal.2020,
  author    = {Pacholski, Claudia and Rosencrantz, Sophia and Rosencrantz, Ruben R. and Balderas-Valadez, Ruth Fabiola},
  title     = {Plasmonic biosensors fabricated by galvanic displacement reactions for monitoring biomolecular interactions in real time},
  series = {Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica},
  volume    = {412},
  journal   = {Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica},
  number    = {14},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1618-2642},
  doi       = {10.1007/s00216-020-02414-0},
  pages     = {3433 -- 3445},
  year      = {2020},
  abstract  = {Optical sensors are prepared by reduction of gold ions using freshly etched hydride-terminated porous silicon, and their ability to specifically detect binding between protein A/rabbit IgG and asialofetuin/Erythrina cristagalli lectin is studied. The fabrication process is simple, fast, and reproducible, and does not require complicated lab equipment. The resulting nanostructured gold layer on silicon shows an optical response in the visible range based on the excitation of localized surface plasmon resonance. Variations in the refractive index of the surrounding medium result in a color change of the sensor which can be observed by the naked eye. By monitoring the spectral position of the localized surface plasmon resonance using reflectance spectroscopy, a bulk sensitivity of 296 nm +/- 3 nm/RIU is determined. Furthermore, selectivity to target analytes is conferred to the sensor through functionalization of its surface with appropriate capture probes. For this purpose, biomolecules are deposited either by physical adsorption or by covalent coupling. Both strategies are successfully tested, i.e., the optical response of the sensor is dependent on the concentration of respective target analyte in the solution facilitating the determination of equilibrium dissociation constants for protein A/rabbit IgG as well as asialofetuin/Erythrina cristagalli lectin which are in accordance with reported values in literature. These results demonstrate the potential of the developed optical sensor for cost-efficient biosensor applications.},
  language  = {en}
}
@misc{BehrensBalischewskiSperlichetal.2022,
  author    = {Behrens, Karsten and Balischewski, Christian and Sperlich, Eric and Menski, Antonia Isabell and Balderas-Valadez, Ruth Fabiola and Pacholski, Claudia and G{\"u}nter, Christina and Lubahn, Susanne and Kelling, Alexandra and Taubert, Andreas},
  title     = {Mixed chloridometallate(ii) ionic liquids with tunable color and optical response for potential ammonia sensors},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1316},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-58751},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-587512},
  pages     = {35072 -- 35082},
  year      = {2022},
  abstract  = {Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup.},
  language  = {en}
}
@article{BehrensBalischewskiSperlichetal.2022,
  author    = {Behrens, Karsten and Balischewski, Christian and Sperlich, Eric and Menski, Antonia Isabell and Balderas-Valadez, Ruth Fabiola and Pacholski, Claudia and G{\"u}nter, Christina and Lubahn, Susanne and Kelling, Alexandra and Taubert, Andreas},
  title     = {Mixed chloridometallate(ii) ionic liquids with tunable color and optical response for potential ammonia sensors},
  series = {RSC Advances},
  volume    = {12},
  journal   = {RSC Advances},
  publisher = {RSC},
  address   = {London},
  issn      = {2046-2069},
  doi       = {10.1039/d2ra05581c},
  pages     = {35072 -- 35082},
  year      = {2022},
  abstract  = {Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup.},
  language  = {en}
}
@article{PolleyWernerBalderasValadezetal.2022,
  author    = {Polley, Nabarun and Werner, Peter and Balderas-Valadez, Ruth Fabiola and Pacholski, Claudia},
  title     = {Bottom, top, or in between},
  series = {Advanced materials interfaces},
  volume    = {9},
  journal   = {Advanced materials interfaces},
  number    = {15},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {2196-7350},
  doi       = {10.1002/admi.202102312},
  pages     = {10},
  year      = {2022},
  abstract  = {Attractive label-free plasmonic optical fiber sensors can be developed by cleverly choosing the arrangement of plasmonic nanostructures and other building blocks. Here, the final response depends very much on the alignment and position (stacking) of the individual elements. In this work, three different types of fiber optic sensing geometries fabricated by simple layer-by-layer stacking are presented, consisting of stimulus-sensitive poly-N-isopropylacrylamide (polyNIPAM) microgel arrays and plasmonic nanohole arrays (NHAs), namely NHA/polyNIPAM, polyNIPAM/NHA, polyNIPAM/NHA/polyNIPAM. Their optical response to a representative stimulus, namely temperature, is investigated. NHA/polyNIPAM monitors the volume phase transition of polyNIPAM microgels through changes in the spectral position and the amplitude of the reflection minimum of plasmonic NHA. In contrast, polyNIPAM/NHA shows a more complex response to the swelling and collapse of polyNIPAM microgels in their reflectance spectra. The most pronounced changes in optical response are observed by monitoring the amplitude of the reflectance minimum of this sensor during heating/cooling cycles. Finally, the triple stack of polyNIPAM/NHA/polyNIPAM at the end of a optical fiber tip combines the advantages of the NHA/polyNIPAM, polyNIPAM/NHA double stacks for optical sensing. The unique layer-by-layer stacking of microgel and nanostructure is customizable and can be easily adopted for other applications.},
  language  = {en}
}
@article{BalderasValadezPacholski2021,
  author    = {Balderas-Valadez, Ruth Fabiola and Pacholski, Claudia},
  title     = {Plasmonic Nanohole Arrays on Top of Porous Silicon Sensors},
  series = {ACS applied materials \& interfaces},
  volume    = {13},
  journal   = {ACS applied materials \& interfaces},
  number    = {30},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1944-8244},
  doi       = {10.1021/acsami.1c07034},
  pages     = {36436 -- 36444},
  year      = {2021},
  abstract  = {Label-free optical sensors are attractive candidates, for example, for detecting toxic substances and monitoring biomolecular interactions. Their performance can be pushed by the design of the sensor through clever material choices and integration of components. In this work, two porous materials, namely, porous silicon and plasmonic nanohole arrays, are combined in order to obtain increased sensitivity and dual-mode sensing capabilities. For this purpose, porous silicon monolayers are prepared by electrochemical etching and plasmonic nanohole arrays are obtained using a bottom-up strategy. Hybrid sensors of these two materials are realized by transferring the plasmonic nanohole array on top of the porous silicon. Reflectance spectra of the hybrid sensors are characterized by a fringe pattern resulting from the Fabry-P{\´e}rot interference at the porous silicon borders, which is overlaid with a broad dip based on surface plasmon resonance in the plasmonic nanohole array. In addition, the hybrid sensor shows a significant higher reflectance in comparison to the porous silicon monolayer. The sensitivities of the hybrid sensor to refractive index changes are separately determined for both components. A significant increase in sensitivity from 213 ± 12 to 386 ± 5 nm/RIU is determined for the transfer of the plasmonic nanohole array sensors from solid glass substrates to porous silicon monolayers. In contrast, the spectral position of the interference pattern of porous silicon monolayers in different media is not affected by the presence of the plasmonic nanohole array. However, the changes in fringe pattern reflectance of the hybrid sensor are increased 3.7-fold after being covered with plasmonic nanohole arrays and could be used for high-sensitivity sensing. Finally, the capability of the hybrid sensor for simultaneous and independent dual-mode sensing is demonstrated.},
  language  = {en}
}
@article{BalderasValadezAntunezOliveMendezetal.2017,
  author    = {Balderas-Valadez, Ruth Fabiola and Antunez, E. E. and Olive-Mendez, Sion Federico and Pacholski, Claudia and Campos-Alvarez, Jose and Bokhimi, Xim and Agarwal, V.},
  title     = {Porous silicon pillar and bilayer structure as a nucleation center for the formation of aligned vanadium pentoxide nanorods},
  series = {Ceramics International},
  volume    = {43},
  journal   = {Ceramics International},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0272-8842},
  doi       = {10.1016/j.ceramint.2017.03.114},
  pages     = {8023 -- 8030},
  year      = {2017},
  abstract  = {Porous silicon single layer (PSM), bilayer (PSB) and pillar (PSP) structures have been evaluated as nucleation centers for vanadium pentoxide (V2O5) crystals. Deposition of vanadium precursor over different substrates (drop casting technique), followed by annealing treatment under Ar-H-2 (5\% H-2) atmosphere, induced crystallization of vanadium oxide. With respect to c-Si/SiO2 substrate, V2O5 nanorods with relatively large aspect ratio were formed over and within PSP structures. On the other hand, pores in PSM and PSB were found to be filled with relatively smaller crystals. Additionally, PSB provided a nucleation substrate capable to align the nanocrystals in a preferential orientation, while V2O5 crystals grown on PSP were found to be randomly aligned around the nanoporous pillar microstructure. Nanorods and nanocrystals were identified as V2O5 by temperature-controlled XRD measurements and evidence of their crystalline nature was observed via transmission electron microscopy. A careful analysis of electronic microscopy images allows the identification of the facets composing the ends of the crystals and its corresponding surface free energy has been evaluated employing the Wulff theorem. Such high surface area composite structures have potential applications as cathode material in Lithium-ion batteries.},
  language  = {en}
}
@article{StanglmairNeubrechPacholski2018,
  author    = {Stanglmair, Christoph and Neubrech, Frank and Pacholski, Claudia},
  title     = {Chemical routes to surface enhanced infrared absorption (SEIRA) substrates},
  series = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics},
  volume    = {232},
  journal   = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics},
  number    = {9-11},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0942-9352},
  doi       = {10.1515/zpch-2018-1132},
  pages     = {1527 -- 1539},
  year      = {2018},
  abstract  = {Bottom-up strategies for fabricating SEIRA substrates are presented. For this purpose, wet-chemically prepared gold nanoparticles are coated with a polystyrene shell and subsequently self-assembled into different nanostructures such as quasi-hexagonally ordered gold nanoparticle monolayers, double layers, and honeycomb structures. Furthermore elongated gold nanostructures are obtained by sintering of gold nanoparticle double layers. The optical properties of these different gold nanostructures are directly connected to their morphology and geometrical arrangement - leading to surface plasmon resonances from the visible to the infrared wavelength range. Finally, SEIRA enhancement factors are determined. Gold nanoparticle double layers show the best performance as SEIRA substrates.},
  language  = {en}
}
@article{HollandMoritzGraupnerMoelleretal.2018,
  author    = {Holland-Moritz, Henry and Graupner, Julia and M{\"o}ller, Wolfhard and Pacholski, Claudia and Ronning, Carsten},
  title     = {Dynamics of nanoparticle morphology under low energy ion irradiation},
  series = {Nanotechnology},
  volume    = {29},
  journal   = {Nanotechnology},
  number    = {31},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0957-4484},
  doi       = {10.1088/1361-6528/aac36c},
  pages     = {7},
  year      = {2018},
  abstract  = {If nanostructures are irradiated with energetic ions, the mechanism of sputtering becomes important when the ion range matches about the size of the nanoparticle. Gold nanoparticles with diameters of similar to 50 nm on top of silicon substrates with a native oxide layer were irradiated by gallium ions with energies ranging from 1 to 30 keV in a focused ion beam system. High resolution in situ scanning electron microscopy imaging permits detailed insights in the dynamics of the morphology change and sputter yield. Compared to bulk-like structures or thin films, a pronounced shaping and enhanced sputtering in the nanostructures occurs, which enables a specific shaping of these structures using ion beams. This effect depends on the ratio of nanoparticle size and ion energy. In the investigated energy regime, the sputter yield increases at increasing ion energy and shows a distinct dependence on the nanoparticle size. The experimental findings are directly compared to Monte Carlo simulations obtained from iradina and TRI3DYN, where the latter takes into account dynamic morphological and compositional changes of the target.},
  language  = {en}
}