@misc{HugenschmidtGiannopoulosTronicke2019, author = {Hugenschmidt, Johannes and Giannopoulos, Antonios and Tronicke, Jens}, title = {Foreword}, series = {Near surface geophysics}, volume = {17}, journal = {Near surface geophysics}, number = {3}, publisher = {Wiley}, address = {Oxford}, issn = {1569-4445}, doi = {10.1002/nsg.12050}, pages = {199 -- 200}, year = {2019}, language = {en} } @article{AllroggenBoothBakeretal.2019, author = {Allroggen, Niklas Robin and Booth, Adam D. and Baker, Sandra E. and Ellwood, Stephen A. and Tronicke, Jens}, title = {High-resolution imaging and monitoring of animal tunnels using 3D ground-penetrating radar}, series = {Near surface geophysics}, volume = {17}, journal = {Near surface geophysics}, number = {3}, publisher = {Wiley}, address = {Hoboken}, issn = {1569-4445}, doi = {10.1002/nsg.12039}, pages = {291 -- 298}, year = {2019}, abstract = {Ground-penetrating radar is widely used to provide highly resolved images of subsurface sedimentary structures, with implications for processes active in the vadose zone. Frequently overlooked among these structures are tunnels excavated by fossorial animals (e.g., moles). We present two repeated ground-penetrating radar surveys performed a year apart in 2016 and 2017. Careful three-dimensional data processing reveals, in each data set, a pattern of elongated structures that are interpreted as a subsurface mole tunnel network. Our data demonstrate the ability of three-dimensional ground-penetrating radar imaging to non-invasively delineate the small animal tunnels (similar to 5 cm diameter) at a higher spatial and geolocation resolution than has previously been achieved. In turn, this makes repeated surveys and, therefore, long-term monitoring possible. Our results offer valuable insight into the understanding of the near-surface and showcase a potential new application for a geophysical method as well as a non-invasive method of ecological surveying.}, language = {en} } @article{TronickeTrauth2018, author = {Tronicke, Jens and Trauth, Martin H.}, title = {Classroom-sized geophysical experiments}, series = {European Journal of Physics}, volume = {39}, journal = {European Journal of Physics}, number = {3}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0143-0807}, doi = {10.1088/1361-6404/aaad5b}, pages = {15}, year = {2018}, abstract = {Modern mobile devices (i.e. smartphones and tablet computers) are widespread, everyday tools, which are equipped with a variety of sensors including three-axis magnetometers. Here, we investigate the feasibility and the potential of using such mobile devices to mimic geophysical experiments in the classroom in a table-top setup. We focus on magnetic surveying and present a basic setup of a table-top experiment for collecting three-component magnetic data across well-defined source bodies and structures. Our results demonstrate that the quality of the recorded data is sufficient to address a number of important basic concepts in the magnetic method. The shown examples cover the analysis of magnetic data recorded across different kinds of dipole sources, thus illustrating the complexity of magnetic anomalies. In addition, we analyze the horizontal resolution capabilities using a pair of dipole sources placed at different horizontal distances to each other. Furthermore, we demonstrate that magnetic data recorded with a mobile device can even be used to introduce filtering, transformation, and inversion approaches as they are typically used when processing magnetic data sets recorded for real-world field applications. Thus, we conclude that such table-top experiments represent an easy-to-implement experimental procedure (as student exercise or classroom demonstration) and can provide first hands-on experience in the basic principles of magnetic surveying including the fundamentals of data acquisition, analysis and processing, as well as data evaluation and interpretation.}, language = {en} } @article{KloseGuillemoteauSimonetal.2018, author = {Klose, Tim and Guillemoteau, Julien and Simon, Francois-Xavier and Tronicke, Jens}, title = {Toward subsurface magnetic permeability imaging with electromagnetic induction sensors}, series = {Geophysics}, volume = {83}, journal = {Geophysics}, number = {5}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2017-0827.1}, pages = {E335 -- E345}, year = {2018}, abstract = {In near-surface geophysics, small portable loop-loop electro-magnetic induction (EMI) sensors using harmonic sources with a constant and rather small frequency are increasingly used to investigate the electrical properties of the subsurface. For such sensors, the influence of electrical conductivity and magnetic permeability on the EMI response is well-understood. Typically, data analysis focuses on reconstructing an electrical conductivity model by inverting the out-of-phase response. However, in a variety of near-surface applications, magnetic permeability (or susceptibility) models derived from the in-phase (IP) response may provide important additional information. In view of developing a fast 3D inversion procedure of the IP response for a dense grid of measurement points, we first analyze the 3D sensitivity functions associated with a homogeneous permeable half-space. Then, we compare synthetic data computed using a linear forward-modeling method based on these sensitivity functions with synthetic data computed using full nonlinear forward-modeling methods. The results indicate the correctness and applicability of our linear forward-modeling approach. Furthermore, we determine the advantages of converting IP data into apparent permeability, which, for example, allows us to extend the applicability of the linear forward-modeling method to high-magnetic environments. Finally, we compute synthetic data with the linear theory for a model consisting of a controlled magnetic target and compare the results with field data collected with a four-configuration loop-loop EMI sensor. With this field-scale experiment, we determine that our linear forward-modeling approach can reproduce measured data with sufficiently small error, and, thus, it represents the basis for developing efficient inversion approaches.}, language = {en} } @article{GuillemoteauLueckTronicke2017, author = {Guillemoteau, Julien and L{\"u}ck, Erika and Tronicke, Jens}, title = {1D inversion of direct current data acquired with a rolling electrode system}, series = {Journal of applied geophysics}, volume = {146}, journal = {Journal of applied geophysics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0926-9851}, doi = {10.1016/j.jappgeo.2017.09.010}, pages = {167 -- 177}, year = {2017}, abstract = {Direct current systems employing a kinematic surveying strategy allow to analyze the electrical resistivity of the subsurface for large areas (i.e., several hectares). Typical applications are found in precision agriculture, archaeological prospecting and soil sciences. With the typical survey setting, the collected data sets are often characterized by a rather high level of noise and a rather coarse lateral sampling compared to data acquired with fixed electrodes. We therefore present an efficient one-dimensional inversion approach in which we put special attention on modeling the effects of noise. We apply this method to data recorded with a five-offset equatorial dipole-dipole system employing rolling electrodes. By performing several synthetic tests with realistic noise levels, we found that the considered five-configuration soundings allow for a reliable imaging of two-layer cases in the uppermost two meters of the subsurface, where the subsurface can be assumed to follow a horizontally layered geometry within 3 m around the system. By analyzing the corresponding sensitivity functions, we also show that the equatorial dipole-dipole array is relatively well suited for a 1D inversion approach compared to standard in-line electrode arrays. To illustrate this aspect, we show that our method can provide results similar to those obtained with a 2D Wenner imaging procedure for data recorded across a well-constrained 2D target. We finally apply our method to a large five-offset data set acquired in an agricultural study. The final pseudo-3D model of electrical resistivity is in accordance with borehole data available for the surveyed area. Our results demonstrate the applicability and the versatility of the presented inversion approach for large-scale data sets as they are typically collected with such rolling electrode systems. (C) 2017 Elsevier B.V. All rights reserved.}, language = {en} } @article{TronickePaasche2017, author = {Tronicke, Jens and Paasche, Hendrik}, title = {Integrated interpretation of 2D ground-penetrating radar, P-, and S-wave velocity models in terms of petrophysical properties}, series = {Interpretation : a journal of subsurface characterization}, volume = {5}, journal = {Interpretation : a journal of subsurface characterization}, number = {1}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {2324-8858}, doi = {10.1190/INT-2016-0081.1}, pages = {T121 -- T130}, year = {2017}, abstract = {Near-surface geophysical techniques are extensively used in a variety of engineering, environmental, geologic, and hydrologic applications. While many of these applications ask for detailed, quantitative models of selected material properties, geophysical data are increasingly used to estimate such target properties. Typically, this estimation procedure relies on a two-step workflow including (1) the inversion of geophysical data and (2) the petrophysical translation of the inverted parameter models into the target properties. Standard deterministic implementations of such a quantitative interpretation result in a single best-estimate model, often without considering and propagating the uncertainties related to the two steps. We address this problem by using a rather novel, particle-swarm-based global joint strategy for data inversion and by implementing Monte Carlo procedures for petrophysical property estimation. We apply our proposed workflow to crosshole ground-penetrating radar, P-, and S-wave data sets collected at a well-constrained test site for a detailed geotechnical characterization of unconsolidated sands. For joint traveltime inversion, the chosen global approach results in ensembles of acceptable velocity models, which are analyzed to appraise inversion-related uncertainties. Subsequently, the entire ensembles of inverted velocity models are considered to estimate selected petrophysical properties including porosity, bulk density, and elastic moduli via well-established petrophysical relations implemented in a Monte Carlo framework. Our results illustrate the potential benefit of such an advanced interpretation strategy; i.e., the proposed workflow allows to study how uncertainties propagate into the finally estimated property models, while concurrently we are able to study the impact of uncertainties in the used petrophysical relations (e.g., the influence of uncertain, user-specified parameters). We conclude that such statistical approaches for the quantitative interpretation of geophysical data can be easily extended and adapted to other applications and geophysical methods and might be an important step toward increasing the popularity and acceptance of geophysical tools in engineering practice.}, language = {en} } @misc{AngermannJackischAllroggenetal.2017, author = {Angermann, Lisa and Jackisch, Conrad and Allroggen, Niklas and Sprenger, Matthias and Zehe, Erwin and Tronicke, Jens and Weiler, Markus and Blume, Theresa}, title = {Form and function in hillslope hydrology}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {658}, issn = {1866-8372}, doi = {10.25932/publishup-41916}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419161}, pages = {22}, year = {2017}, abstract = {The phrase form and function was established in architecture and biology and refers to the idea that form and functionality are closely correlated, influence each other, and co-evolve. We suggest transferring this idea to hydrological systems to separate and analyze their two main characteristics: their form, which is equivalent to the spatial structure and static properties, and their function, equivalent to internal responses and hydrological behavior. While this approach is not particularly new to hydrological field research, we want to employ this concept to explicitly pursue the question of what information is most advantageous to understand a hydrological system. We applied this concept to subsurface flow within a hillslope, with a methodological focus on function: we conducted observations during a natural storm event and followed this with a hillslope-scale irrigation experiment. The results are used to infer hydrological processes of the monitored system. Based on these findings, the explanatory power and conclusiveness of the data are discussed. The measurements included basic hydrological monitoring methods, like piezometers, soil moisture, and discharge measurements. These were accompanied by isotope sampling and a novel application of 2-D time-lapse GPR (ground-penetrating radar). The main finding regarding the processes in the hillslope was that preferential flow paths were established quickly, despite unsaturated conditions. These flow paths also caused a detectable signal in the catchment response following a natural rainfall event, showing that these processes are relevant also at the catchment scale. Thus, we conclude that response observations (dynamics and patterns, i.e., indicators of function) were well suited to describing processes at the observational scale. Especially the use of 2-D time-lapse GPR measurements, providing detailed subsurface response patterns, as well as the combination of stream-centered and hillslope-centered approaches, allowed us to link processes and put them in a larger context. Transfer to other scales beyond observational scale and generalizations, however, rely on the knowledge of structures (form) and remain speculative. The complementary approach with a methodological focus on form (i.e., structure exploration) is presented and discussed in the companion paper by Jackisch et al. (2017).}, language = {en} } @misc{JackischAngermannAllroggenetal.2017, author = {Jackisch, Conrad and Angermann, Lisa and Allroggen, Niklas and Sprenger, Matthias and Blume, Theresa and Tronicke, Jens and Zehe, Erwin}, title = {Form and function in hillslope hydrology}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {665}, issn = {1866-8372}, doi = {10.25932/publishup-41918}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419188}, pages = {27}, year = {2017}, abstract = {The study deals with the identification and characterization of rapid subsurface flow structures through pedo- and geo-physical measurements and irrigation experiments at the point, plot and hillslope scale. Our investigation of flow-relevant structures and hydrological responses refers to the general interplay of form and function, respectively. To obtain a holistic picture of the subsurface, a large set of different laboratory, exploratory and experimental methods was used at the different scales. For exploration these methods included drilled soil core profiles, in situ measurements of infiltration capacity and saturated hydraulic conductivity, and laboratory analyses of soil water retention and saturated hydraulic conductivity. The irrigation experiments at the plot scale were monitored through a combination of dye tracer, salt tracer, soil moisture dynamics, and 3-D time-lapse ground penetrating radar (GPR) methods. At the hillslope scale the subsurface was explored by a 3-D GPR survey. A natural storm event and an irrigation experiment were monitored by a dense network of soil moisture observations and a cascade of 2-D time-lapse GPR "trenches". We show that the shift between activated and non-activated state of the flow paths is needed to distinguish structures from overall heterogeneity. Pedo-physical analyses of point-scale samples are the basis for sub-scale structure inference. At the plot and hillslope scale 3-D and 2-D time-lapse GPR applications are successfully employed as non-invasive means to image subsurface response patterns and to identify flow-relevant paths. Tracer recovery and soil water responses from irrigation experiments deliver a consistent estimate of response velocities. The combined observation of form and function under active conditions provides the means to localize and characterize the structures (this study) and the hydrological processes (companion study Angermann et al., 2017, this issue).}, language = {en} } @article{GuillemoteauChristensenJacobsenetal.2017, author = {Guillemoteau, Julien and Christensen, Niels Boie and Jacobsen, Bo Holm and Tronicke, Jens}, title = {Fast 3D multichannel deconvolution of electromagnetic induction loop-loop apparent conductivity data sets acquired at low induction numbers}, series = {Geophysics}, volume = {82}, journal = {Geophysics}, publisher = {Society of Exploration Geophysicists}, address = {Tulsa}, issn = {0016-8033}, doi = {10.1190/GEO2016-0518.1}, pages = {E357 -- E369}, year = {2017}, abstract = {Electromagnetic induction (EMI) sensors using sufficiently low-frequency harmonic sources and sufficiently small loop separations operate in the low-induction-number (LIN) domain for a relatively wide range of background conductivity. These systems are used in diverse near-surface investigations including applications from soil sciences, hydrology, and archaeology. The special case of portable multiconfiguration EMI sensors operating at frequencies <= 20 kHz offers the possibility of using a fast linear deconvolution method to interpret multichannel data sets in three dimensions. Here, we have developed a fast 3D inversion/deconvolution method regularized with 3D smoothness constraints and formulated in the hybrid spectral-spatial domain. Compared with other linear approaches, the spectral-spatial domain formulation significantly reduces the computational cost of the processing and opens the door for real-time 3D interpretation of large data sets consisting of more than 100,000 data points. First, we test our proposed algorithm on synthetic data sets computed with the full Maxwell theory. Then, we apply our method to a real four-configuration EMI data set acquired to map the thickness of peat layers embedded in a sandy environment. For the synthetic and the field example, we compared our result with the result obtained using a standard point-by-point 1D nonlinear inversion approach. This comparison demonstrates that the proposed methodology provides superior lateral resolution compared with the 1D nonlinear inversion, at the same time significantly reducing the computational cost of the processing.}, language = {en} } @article{AngermannJackischAllroggenetal.2017, author = {Angermann, Lisa and Jackisch, Conrad and Allroggen, Niklas and Sprenger, Matthias and Zehe, Erwin and Tronicke, Jens and Weiler, Markus and Blume, Theresa}, title = {Form and function in hillslope hydrology: characterization of subsurface flow based on response observations}, series = {Hydrology and earth system sciences : HESS}, volume = {21}, journal = {Hydrology and earth system sciences : HESS}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1027-5606}, doi = {10.5194/hess-21-3727-2017}, pages = {3727 -- 3748}, year = {2017}, abstract = {The phrase form and function was established in architecture and biology and refers to the idea that form and functionality are closely correlated, influence each other, and co-evolve. We suggest transferring this idea to hydrological systems to separate and analyze their two main characteristics: their form, which is equivalent to the spatial structure and static properties, and their function, equivalent to internal responses and hydrological behavior. While this approach is not particularly new to hydrological field research, we want to employ this concept to explicitly pursue the question of what information is most advantageous to understand a hydrological system. We applied this concept to subsurface flow within a hillslope, with a methodological focus on function: we conducted observations during a natural storm event and followed this with a hillslope-scale irrigation experiment. The results are used to infer hydrological processes of the monitored system. Based on these findings, the explanatory power and conclusiveness of the data are discussed. The measurements included basic hydrological monitoring methods, like piezometers, soil moisture, and discharge measurements. These were accompanied by isotope sampling and a novel application of 2-D time-lapse GPR (ground-penetrating radar). The main finding regarding the processes in the hillslope was that preferential flow paths were established quickly, despite unsaturated conditions. These flow paths also caused a detectable signal in the catchment response following a natural rainfall event, showing that these processes are relevant also at the catchment scale. Thus, we conclude that response observations (dynamics and patterns, i.e., indicators of function) were well suited to describing processes at the observational scale. Especially the use of 2-D time-lapse GPR measurements, providing detailed subsurface response patterns, as well as the combination of stream-centered and hillslope-centered approaches, allowed us to link processes and put them in a larger context. Transfer to other scales beyond observational scale and generalizations, however, rely on the knowledge of structures (form) and remain speculative. The complementary approach with a methodological focus on form (i.e., structure exploration) is presented and discussed in the companion paper by Jackisch et al. (2017).}, language = {en} }