@phdthesis{Wendi2018, author = {Wendi, Dadiyorto}, title = {Recurrence Plots and Quantification Analysis of Flood Runoff Dynamics}, doi = {10.25932/publishup-43191}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-431915}, school = {Universit{\"a}t Potsdam}, pages = {114}, year = {2018}, abstract = {This paper introduces a novel measure to assess similarity between event hydrographs. It is based on Cross Recurrence Plots and Recurrence Quantification Analysis which have recently gained attention in a range of disciplines when dealing with complex systems. The method attempts to quantify the event runoff dynamics and is based on the time delay embedded phase space representation of discharge hydrographs. A phase space trajectory is reconstructed from the event hydrograph, and pairs of hydrographs are compared to each other based on the distance of their phase space trajectories. Time delay embedding allows considering the multi-dimensional relationships between different points in time within the event. Hence, the temporal succession of discharge values is taken into account, such as the impact of the initial conditions on the runoff event. We provide an introduction to Cross Recurrence Plots and discuss their parameterization. An application example based on flood time series demonstrates how the method can be used to measure the similarity or dissimilarity of events, and how it can be used to detect events with rare runoff dynamics. It is argued that this methods provides a more comprehensive approach to quantify hydrograph similarity compared to conventional hydrological signatures.}, language = {en} } @article{OzturkWendiCrisologoetal.2018, author = {Ozturk, Ugur and Wendi, Dadiyorto and Crisologo, Irene and Riemer, Adrian and Agarwal, Ankit and Vogel, Kristin and Andres Lopez-Tarazon, Jose and Korup, Oliver}, title = {Rare flash floods and debris flows in southern Germany}, series = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, volume = {626}, journal = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2018.01.172}, pages = {941 -- 952}, year = {2018}, abstract = {Flash floods and debris flows are iconic hazards inmountainous regions with steep relief, high rainfall intensities, rapid snowmelt events, and abundant sediments. The cuesta landscapes of southern Germany hardly come to mind when dealing with such hazards. A series of heavy rainstorms dumping up to 140mm in 2 h caused destructive flash floods and debris flows in May 2016. The most severe damage occurred in the Braunsbach municipality, which was partly buried by 42,000 m(3) of boulders, gravel, mud, and anthropogenic debris from the small catchment of Orlacher Bach (similar to 6 km(2)). We analysed this event by combining rainfall patterns, geological conditions, and geomorphic impacts to estimate an average sediment yield of 14,000 t/km(2) that mostly (similar to 95\%) came from some 50 riparian landslides and channel-bed incision of similar to 2 m. This specific sediment yield ranks among the top 20\% globally, while the intensity-duration curve of the rainstormis similarly in the upper percentile range of storms that had triggered landslides. Compared to similar-sized catchments in the greater region hit by the rainstorms, we find that the Orlacher Bach is above the 95th percentile in terms of steepness, storm-rainfall intensity, and topographic curvatures. The flash flood transported a sediment volume equal to as much as 20-40\% of the Pleistocene sediment volume stored in the Orlacher Bach fan, andmay have had several predecessors in the Holocene. River control structures from 1903 and records of a debris flow in the 1920s in a nearby catchment indicate that the local inhabitants may have been aware of the debris-flow hazards earlier. Such recurring and destructive events elude flood-hazard appraisals in humid landscapes of gentle relief, and broaden mechanistic views of how landslides and debris flows contribute to shaping small and deeply cut tributaries in the southern Germany cuesta landscape.}, language = {en} } @article{WendiMarwanMerz2018, author = {Wendi, Dadiyorto and Marwan, Norbert and Merz, Bruno}, title = {In Search of Determinism-Sensitive Region to Avoid Artefacts in Recurrence Plots}, series = {International journal of bifurcation and chaos : in applied sciences and engineering}, volume = {28}, journal = {International journal of bifurcation and chaos : in applied sciences and engineering}, number = {1}, publisher = {World Scientific}, address = {Singapore}, issn = {0218-1274}, doi = {10.1142/S0218127418500074}, pages = {15}, year = {2018}, abstract = {As an effort to reduce parameter uncertainties in constructing recurrence plots, and in particular to avoid potential artefacts, this paper presents a technique to derive artefact-safe region of parameter sets. This technique exploits both deterministic (incl. chaos) and stochastic signal characteristics of recurrence quantification (i.e. diagonal structures). It is useful when the evaluated signal is known to be deterministic. This study focuses on the recurrence plot generated from the reconstructed phase space in order to represent many real application scenarios when not all variables to describe a system are available (data scarcity). The technique involves random shuffling of the original signal to destroy its original deterministic characteristics. Its purpose is to evaluate whether the determinism values of the original and the shuffled signal remain closely together, and therefore suggesting that the recurrence plot might comprise artefacts. The use of such determinism-sensitive region shall be accompanied by standard embedding optimization approaches, e.g. using indices like false nearest neighbor and mutual information, to result in a more reliable recurrence plot parameterization.}, language = {en} } @article{BronstertAgarwalBoessenkooletal.2018, author = {Bronstert, Axel and Agarwal, Ankit and Boessenkool, Berry and Crisologo, Irene and Fischer, Madlen and Heistermann, Maik and Koehn-Reich, Lisei and Andres Lopez-Tarazon, Jose and Moran, Thomas and Ozturk, Ugur and Reinhardt-Imjela, Christian and Wendi, Dadiyorto}, title = {Forensic hydro-meteorological analysis of an extreme flash flood}, series = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, volume = {630}, journal = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0048-9697}, doi = {10.1016/j.scitotenv.2018.02.241}, pages = {977 -- 991}, year = {2018}, abstract = {The flash-flood in Braunsbach in the north-eastern part of Baden-Wuerttemberg/Germany was a particularly strong and concise event which took place during the floods in southern Germany at the end of May/early June 2016. This article presents a detailed analysis of the hydro-meteorological forcing and the hydrological consequences of this event. A specific approach, the "forensic hydrological analysis" was followed in order to include and combine retrospectively a variety of data from different disciplines. Such an approach investigates the origins, mechanisms and course of such natural events if possible in a "near real time" mode, in order to follow the most recent traces of the event. The results show that it was a very rare rainfall event with extreme intensities which, in combination with catchment properties, led to extreme runoff plus severe geomorphological hazards, i.e. great debris flows, which together resulted in immense damage in this small rural town Braunsbach. It was definitely a record-breaking event and greatly exceeded existing design guidelines for extreme flood discharge for this region, i.e. by a factor of about 10. Being such a rare or even unique event, it is not reliably feasible to put it into a crisp probabilistic context. However, one can conclude that a return period clearly above 100 years can be assigned for all event components: rainfall, peak discharge and sediment transport. Due to the complex and interacting processes, no single flood cause or reason for the very high damage can be identified, since only the interplay and the cascading characteristics of those led to such an event. The roles of different human activities on the origin and/or intensification of such an extreme event are finally discussed. (C) 2018 Elsevier B.V. All rights reserved.}, language = {en} } @misc{KimSunWendietal.2018, author = {Kim, Dongeon and Sun, Yabin and Wendi, Dadiyorto and Jiang, Ze and Liong, Shie-Yui and Gourbesville, Philippe}, title = {Flood modelling framework for Kuching City, Malaysia}, series = {Advances in Hydroinformatics: SimHydro 2017 - Choosing The Right Model in Applied Hydraulics}, journal = {Advances in Hydroinformatics: SimHydro 2017 - Choosing The Right Model in Applied Hydraulics}, publisher = {Springer}, address = {Singapore}, isbn = {978-981-10-7218-5}, issn = {2364-6934}, doi = {10.1007/978-981-10-7218-5_39}, pages = {559 -- 568}, year = {2018}, abstract = {Several areas in Southeast Asia are very vulnerable to climate change and unable to take immediate/effective actions on countermeasures due to insufficient capabilities. Malaysia, in particular the east coast of peninsular Malaysia and Sarawak, is known as one of the vulnerable regions to flood disaster. Prolonged and intense rainfall, natural activities and increase in runoff are the main reasons to cause flooding in this area. In addition, topographic conditions also contribute to the occurrence of flood disaster. Kuching city is located in the northwest of Borneo Island and part of Sarawak river catchment. This area is a developing state in Malaysia experiencing rapid urbanization since 2000s, which has caused the insufficient data availability in topography and hydrology. To deal with these challenging issues, this study presents a flood modelling framework using the remote sensing technologies and machine learning techniques to acquire the digital elevation model (DEM) with improved accuracy for the non-surveyed areas. Intensity-duration-frequency (IDF) curves were derived from climate model for various scenario simulations. The developed flood framework will be beneficial for the planners, policymakers, stakeholders as well as researchers in the field of water resource management in the aspect of providing better ideas/tools in dealing with the flooding issues in the region.}, language = {en} } @article{WendiMarwan2018, author = {Wendi, Dadiyorto and Marwan, Norbert}, title = {Extended recurrence plot and quantification for noisy continuous dynamical systems}, series = {Chaos : an interdisciplinary journal of nonlinear science}, volume = {28}, journal = {Chaos : an interdisciplinary journal of nonlinear science}, number = {8}, publisher = {American Institute of Physics}, address = {Melville}, issn = {1054-1500}, doi = {10.1063/1.5025485}, pages = {9}, year = {2018}, abstract = {One main challenge in constructing a reliable recurrence plot (RP) and, hence, its quantification [recurrence quantification analysis (RQA)] of a continuous dynamical system is the induced noise that is commonly found in observation time series. This induced noise is known to cause disrupted and deviated diagonal lines despite the known deterministic features and, hence, biases the diagonal line based RQA measures and can lead to misleading conclusions. Although discontinuous lines can be further connected by increasing the recurrence threshold, such an approach triggers thick lines in the plot. However, thick lines also influence the RQA measures by artificially increasing the number of diagonals and the length of vertical lines [e.g., Determinism (DET) and Laminarity (LAM) become artificially higher]. To take on this challenge, an extended RQA approach for accounting disrupted and deviated diagonal lines is proposed. The approach uses the concept of a sliding diagonal window with minimal window size that tolerates the mentioned deviated lines and also considers a specified minimal lag between points as connected. This is meant to derive a similar determinism indicator for noisy signal where conventional RQA fails to capture. Additionally, an extended local minima approach to construct RP is also proposed to further reduce artificial block structures and vertical lines that potentially increase the associated RQA like LAM. The methodology and applicability of the extended local minima approach and DET equivalent measure are presented and discussed, respectively.}, language = {en} }