@article{WeberAbuAyyashAbueladasetal.2009, author = {Weber, Michael H. and Abu-Ayyash, Khalil and Abueladas, Abdel-Rahman and Agnon, Amotz and Alasonati-Taš{\´a}rov{\´a}, Zuzana and Al-Zubi, Hashim and Babeyko, Andrey and Bartov, Yuval and Bauer, Klaus and Becken, Michael and Bedrosian, Paul A. and Ben-Avraham, Zvi and Bock, G{\"u}nter and Bohnhoff, Marco and Bribach, Jens and Dulski, Peter and Ebbing, Joerg and El-Kelani, Radwan J. and Foerster, Andrea and F{\"o}rster, Hans-J{\"u}rgen and Frieslander, Uri and Garfunkel, Zvi and G{\"o}tze, Hans-J{\"u}rgen and Haak, Volker and Haberland, Christian and Hassouneh, Mohammed and Helwig, Stefan L. and Hofstetter, Alfons and Hoffmann-Rothe, Arne and Jaeckel, Karl-Heinz and Janssen, Christoph and Jaser, Darweesh and Kesten, Dagmar and Khatib, Mohammed Ghiath and Kind, Rainer and Koch, Olaf and Koulakov, Ivan and Laske, Maria Gabi and Maercklin, Nils}, title = {Anatomy of the Dead Sea transform from lithospheric to microscopic scale}, issn = {8755-1209}, doi = {10.1029/2008rg000264}, year = {2009}, abstract = {Fault zones are the locations where motion of tectonic plates, often associated with earthquakes, is accommodated. Despite a rapid increase in the understanding of faults in the last decades, our knowledge of their geometry, petrophysical properties, and controlling processes remains incomplete. The central questions addressed here in our study of the Dead Sea Transform (DST) in the Middle East are as follows: (1) What are the structure and kinematics of a large fault zone? (2) What controls its structure and kinematics? (3) How does the DST compare to other plate boundary fault zones? The DST has accommodated a total of 105 km of left-lateral transform motion between the African and Arabian plates since early Miocene (similar to 20 Ma). The DST segment between the Dead Sea and the Red Sea, called the Arava/Araba Fault (AF), is studied here using a multidisciplinary and multiscale approach from the mu m to the plate tectonic scale. We observe that under the DST a narrow, subvertical zone cuts through crust and lithosphere. First, from west to east the crustal thickness increases smoothly from 26 to 39 km, and a subhorizontal lower crustal reflector is detected east of the AF. Second, several faults exist in the upper crust in a 40 km wide zone centered on the AF, but none have kilometer-size zones of decreased seismic velocities or zones of high electrical conductivities in the upper crust expected for large damage zones. Third, the AF is the main branch of the DST system, even though it has accommodated only a part (up to 60 km) of the overall 105 km of sinistral plate motion. Fourth, the AF acts as a barrier to fluids to a depth of 4 km, and the lithology changes abruptly across it. Fifth, in the top few hundred meters of the AF a locally transpressional regime is observed in a 100-300 m wide zone of deformed and displaced material, bordered by subparallel faults forming a positive flower structure. Other segments of the AF have a transtensional character with small pull-aparts along them. The damage zones of the individual faults are only 5-20 m wide at this depth range. Sixth, two areas on the AF show mesoscale to microscale faulting and veining in limestone sequences with faulting depths between 2 and 5 km. Seventh, fluids in the AF are carried downward into the fault zone. Only a minor fraction of fluids is derived from ascending hydrothermal fluids. However, we found that on the kilometer scale the AF does not act as an important fluid conduit. Most of these findings are corroborated using thermomechanical modeling where shear deformation in the upper crust is localized in one or two major faults; at larger depth, shear deformation occurs in a 20-40 km wide zone with a mechanically weak decoupling zone extending subvertically through the entire lithosphere.}, language = {en} } @article{HaberlandHampeAutenriethetal.2019, author = {Haberland, Christian and Hampe, Oliver and Autenrieth, Marijke and Voss, Manja}, title = {Balaenoptera borealis Lesson, 1828}, series = {Mammalia}, volume = {83}, journal = {Mammalia}, number = {4}, publisher = {De Gruyter}, address = {Berlin}, issn = {0025-1461}, doi = {10.1515/mammalia-2017-0149}, pages = {343 -- 351}, year = {2019}, abstract = {The whereabouts of the Balaenoptera borealis holotype, the skeleton of a 1819 stranded specimen, have been unknown since the World War II (WWII). Due to nomenclatural confusion, deficient documentation, and finally WWII bombing, which destroyed predominantly cetacean material in the Museum fib Naturkunde Berlin (MfN), the type skeleton of the sei whale sank into oblivion. Construction activities enabled a recent search and study on the remaining whale material. Here, we provide evidence that the type specimen was not destroyed. On the basis of species-wide and individual characters of the type material such as the shape of cranial elements and the pattern of the maxillary foramina, we show that the skull and mandibles, the vertebral column (except the atlas), and the ribs of the holotype remain intact. Further evidence that these skeletal remains belong to the previously missing holotype is provided by the characteristics of the spine. In addition, we analyzed ancient DNA from bone samples and confirm they are B. borealis, and the occurrence of same mitochondrial haplotypes indicate that the bones belong to the same individual. Additionally, a blue inscription was discovered at the caudal epiphysis of a thoracic vertebra; historical research matched this inscription with the material belonging to the former Anatomical-Zootomical Museum, from which the holotype was once bought.}, language = {en} } @article{MaercklinBedrosianHaberlandetal.2005, author = {Maercklin, Nils and Bedrosian, Paul A. and Haberland, Christian and Ritter, O. and Ryberg, Trond and Weber, Michael H. and Weckmann, Ute}, title = {Characterizing a large shear-zone with seismic and magnetotelluric methods : the case of the Dead Sea Transform}, issn = {0094-8276}, year = {2005}, abstract = {Seismic tomography, imaging of seismic scatterers, and magnetotelluric soundings reveal a sharp lithologic contrast along a similar to 10 km long segment of the Arava Fault (AF), a prominent fault of the southern Dead Sea Transform (DST) in the Middle East. Low seismic velocities and resistivities occur on its western side and higher values east of it, and the boundary between the two units coincides partly with a seismic scattering image. At 1 - 4 km depth the boundary is offset to the east of the AF surface trace, suggesting that at least two fault strands exist, and that slip occurred on multiple strands throughout the margin's history. A westward fault jump, possibly associated with straightening of a fault bend, explains both our observations and the narrow fault zone observed by others}, language = {en} } @article{HaberlandRietbrockSchurretal.2003, author = {Haberland, Christian and Rietbrock, Andreas and Schurr, B. and Brasse, Heinrich}, title = {Coincident anomalies of seismic attenuation and electrical resistivity beneath the southern Bolivian Altiplano plateau}, issn = {0094-8276}, year = {2003}, abstract = {Reassessment of local earthquake data from the ANCORP seismological network allowed the calculation of 3D attenuation (Q(p)) tomographic images of crust and upper mantle beneath the southern Bolivian Altiplano around 21degrees S. The images reveal a low-Q(p) middle and lower crust and a moderate-Q(p) upper mantle beneath the southern Altiplano. Beneath the recent magmatic arc, Q(p) is not significantly decreased at this latitude. The distribution of crustal Q(p) coincides with the variation of electrical resistivity, thus limiting the possible mechanisms causing the anomalies. Our findings support the hypothesis that partial melts in middle and lower crust beneath the Altiplano are present on a large scale. We see no evidence for a shallow asthenosphere beneath the southern Altiplano}, language = {en} } @article{JoziNajafabadiHaberlandLeBretonetal.2022, author = {Jozi Najafabadi, Azam and Haberland, Christian and Le Breton, Eline and Handy, Mark R. and Verwater, Vincent F. and Heit, Benjamin and Weber, Michael}, title = {Constraints on crustal structure in the vicinity of the adriatic indenter (European Alps) from Vp and Vp/Vs local earthquake tomography}, series = {Journal of geophysical research : Solid earth}, volume = {127}, journal = {Journal of geophysical research : Solid earth}, number = {2}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1029/2021JB023160}, pages = {22}, year = {2022}, abstract = {In this study, 3-D models of P-wave velocity (Vp) and P-wave and S-wave ratio (Vp/Vs) of the crust and upper mantle in the Eastern and eastern Southern Alps (northern Italy and southern Austria) were calculated using local earthquake tomography (LET). The data set includes high-quality arrival times from well-constrained hypocenters observed by the dense, temporary seismic networks of the AlpArray AASN and SWATH-D. The resolution of the LET was checked by synthetic tests and analysis of the model resolution matrix. The small inter-station spacing (average of similar to 15 km within the SWATH-D network) allowed us to image crustal structure at unprecedented resolution across a key part of the Alps. The derived P velocity model revealed a highly heterogeneous crustal structure in the target area. One of the main findings is that the lower crust is thickened, forming a bulge at 30-50 km depth just south of and beneath the Periadriatic Fault and the Tauern Window. This indicates that the lower crust decoupled both from its mantle substratum as well as from its upper crust. The Moho, taken to be the iso-velocity contour of Vp = 7.25 km/s, agrees with the Moho depth from previous studies in the European and Adriatic forelands. It is shallower on the Adriatic side than on the European side. This is interpreted to indicate that the European Plate is subducted beneath the Adriatic Plate in the Eastern and eastern Southern Alps.}, language = {en} } @article{RybergHaberlandHaberlauetal.2015, author = {Ryberg, Trond and Haberland, Christian and Haberlau, Thomas and Weber, Michael H. and Bauer, Klaus and Behrmann, Jan H. and Jokat, Wilfried}, title = {Crustal structure of northwest Namibia: Evidence for plume-rift-continent interaction}, series = {Geology}, volume = {43}, journal = {Geology}, number = {8}, publisher = {American Institute of Physics}, address = {Boulder}, issn = {0091-7613}, doi = {10.1130/G36768.1}, pages = {739 -- 742}, year = {2015}, abstract = {The causes for the formation of large igneous provinces and hotspot trails are still a matter of considerable dispute. Seismic tomography and other studies suggest that hot mantle material rising from the core-mantle boundary (CMB) might play a significant role in the formation of such hotspot trails. An important area to verify this concept is the South Atlantic region, with hotspot trails that spatially coincide with one of the largest low-velocity regions at the CMB, the African large low shear-wave velocity province. The Walvis Ridge started to form during the separation of the South American and African continents at ca. 130 Ma as a consequence of Gondwana breakup. Here, we present the first deep-seismic sounding images of the crustal structure from the landfall area of the Walvis Ridge at the Namibian coast to constrain processes of plume-lithosphere interaction and the formation of continental flood basalts (Parana and Etendeka continental flood basalts) and associated intrusive rocks. Our study identified a narrow region (<100 km) of high-seismic-velocity anomalies in the middle and lower crust, which we interpret as a massive mafic intrusion into the northern Namibian continental crust. Seismic crustal reflection imaging shows a flat Moho as well as reflectors connecting the high-velocity body with shallow crustal structures that we speculate to mark potential feeder channels of the Etendeka continental flood basalt. We suggest that the observed massive but localized mafic intrusion into the lower crust results from similar-sized variations in the lithosphere (i.e., lithosphere thickness or preexisting structures).}, language = {en} } @article{MuksinHaberlandNukmanetal.2014, author = {Muksin, Umar and Haberland, Christian and Nukman, Mochamad and Bauer, Klaus and Weber, Michael H.}, title = {Detailed fault structure of the Tarutung Pull-Apart Basin in Sumatra, Indonesia, derived from local earthquake data}, series = {Journal of Asian earth sciences}, volume = {96}, journal = {Journal of Asian earth sciences}, publisher = {Elsevier}, address = {Oxford}, issn = {1367-9120}, doi = {10.1016/j.jseaes.2014.09.009}, pages = {123 -- 131}, year = {2014}, abstract = {The Tarutung Basin is located at a right step-over in the northern central segment of the dextral strike-slip Sumatran Fault System (SFS). Details of the fault structure along the Tarutung Basin are derived from the relocations of seismicity as well as from focal mechanism and structural geology. The seismicity distribution derived by a 3D inversion for hypocenter relocation is clustered according to a fault-like seismicity distribution. The seismicity is relocated with a double-difference technique (HYPODD) involving the waveform cross-correlations. We used 46,904 and 3191 arrival differences obtained from catalogue data and cross-correlation analysis, respectively. Focal mechanisms of events were analyzed by applying a grid search method (HASH code). Although there is no significant shift of the hypocenters (10.8 m in average) and centroids (167 m in average), the application of the double difference relocation sharpens the earthquake distribution. The earthquake lineation reflects the fault system, the extensional duplex fault system, and the negative flower structure within the Tarutung Basin. The focal mechanisms of events at the edge of the basin are dominantly of strike-slip type representing the dextral strike-slip Sumatran Fault System. The almost north south striking normal fault events along extensional zones beneath the basin correlate with the maximum principal stress direction which is the direction of the Indo-Australian plate motion. The extensional zones form an en-echelon pattern indicated by the presence of strike-slip faults striking NE SW to NW SE events. The detailed characteristics of the fault system derived from the seismological study are also corroborated by structural geology at the surface. (C) 2014 Elsevier Ltd. All rights reserved.}, language = {en} } @article{BraeuerAschHofstetteretal.2014, author = {Braeuer, Benjamin and Asch, G{\"u}nter and Hofstetter, Rami and Haberland, Christian and Jaser, D. and El-Kelani, R. and Weber, Michael H.}, title = {Detailed seismicity analysis revealing the dynamics of the southern Dead Sea area}, series = {Journal of seismology}, volume = {18}, journal = {Journal of seismology}, number = {4}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-014-9441-4}, pages = {731 -- 748}, year = {2014}, abstract = {Within the framework of the international DESIRE (DEad Sea Integrated REsearch) project, a dense temporary local seismological network was operated in the southern Dead Sea area. During 18 recording months, 648 events were detected. Based on an already published tomography study clustering, focal mechanisms, statistics and the distribution of the microseismicity in relation to the velocity models from the tomography are analysed. The determined b value of 0.74 leads to a relatively high risk of large earthquakes compared to the moderate microseismic activity. The distribution of the seismicity indicates an asymmetric basin with a vertical strike-slip fault forming the eastern boundary of the basin, and an inclined western boundary, made up of strike-slip and normal faults. Furthermore, significant differences between the area north and south of the Bokek fault were observed. South of the Bokek fault, the western boundary is inactive while the entire seismicity occurs on the eastern boundary and below the basin-fill sediments. The largest events occurred here, and their focal mechanisms represent the northwards transform motion of the Arabian plate along the Dead Sea Transform. The vertical extension of the spatial and temporal cluster from February 2007 is interpreted as being related to the locking of the region around the Bokek fault. North of the Bokek fault similar seismic activity occurs on both boundaries most notably within the basin-fill sediments, displaying mainly small events with strike-slip mechanism and normal faulting in EW direction. Therefore, we suggest that the Bokek fault forms the border between the single transform fault and the pull-apart basin with two active border faults.}, language = {en} } @article{MartinHaberlandRietbrock2005, author = {Martin, Sebastian and Haberland, Christian and Rietbrock, Andreas}, title = {Forearc decoupling of guided waves in the Chile-Peru subduction zone}, year = {2005}, abstract = {The structure and alterations of subducted oceanic lithosphere ( e. g., thickness and seismic velocity of oceanic crust) can be obtained by analyzing guided seismic waves generated by earthquakes within the slab (Wadati- Benioff zone). In northern Chile prominent secondary phases from intermediate-depth seismicity, observed in the forearc region can be interpreted as guided waves. For the observation of guided waves it is usually required to have stations close to the wave guide, a fact which is not directly given for forearc stations in subduction zone environments. With the help of finite difference simulations we model the decoupling mechanism of guided waves at the contact between the descending oceanic plate and the upper plate crust where the wave guide is opened due to the equalization of seismic velocities. Provided that suited stations are available, this mechanism allows for the use of intermediate depth seismicity to study the shallow subduction zone structure ( <= 100 km depth)}, language = {en} } @article{BraeuerAschHofstetteretal.2012, author = {Br{\"a}uer, B. and Asch, G{\"u}nter and Hofstetter, Rami and Haberland, Christian and Jaser, D. and El-Kelani, R. and Weber, Michael H.}, title = {High-resolution local earthquake tomography of the southern Dead Sea area}, series = {Geophysical journal international}, volume = {191}, journal = {Geophysical journal international}, number = {3}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0956-540X}, doi = {10.1111/j.1365-246X.2012.05668.x}, pages = {881 -- 897}, year = {2012}, abstract = {Local earthquake data from a dense temporary seismological network in the southern Dead Sea area have been analysed within the project DESIRE (Dead Sea Integrated Research Project). Local earthquakes are used for the first precise image of the distribution of the P-wave velocity and the vP/vS ratios. 65 stations registered 655 local events within 18 months of observation time. A subset of 530 well-locatable events with 26 730 P- and S-arrival times was used to calculate a tomographic model for the vP and vP/vS distribution. Since the study area is at first-order 2-D, a gradual approach was chosen, which compromised a 2-D inversion followed by a 3-D inversion. The sedimentary basin fill is clearly imaged through high vP/vS ratios and low vP. The basin fill shows an asymmetric structure with average depth of 7 km at the western boundary and depth between 10 and 14 km at the eastern boundary. This asymmetry is reflected by the vertical strike-slip eastern border fault, and the normal faulting at the western boundary, caused by the transtensional deformation within the last 5 Myr. Within the basin fill the Lisan salt diapir is imaged through low vP/vS ratios, reflecting its low fluid content. The extensions were determined to 12 km in EW and 17 km in NS direction while its depth is 56 km. The thickness of the pre-basin sediments below the basin fill cannot be derived from the tomography datait is estimated to less than 3 km from former investigations. Below the basin, down to 18 km depth very low P-wave velocities and low vP/vS ratios are observedmost likely caused by fluids from the surrounding crust or the upper mantle.}, language = {en} }