@article{LiGaoSchlaichetal.2017,
  author    = {Li, Mingjun and Gao, Lingyan and Schlaich, Christoph and Zhang, Jianguang and Donskyi, Ievgen S. and Yu, Guozhi and Li, Wenzhong and Tu, Zhaoxu and Rolff, Jens and Schwerdtle, Tanja and Haag, Rainer and Ma, Nan},
  title     = {Construction of Functional Coatings with Durable and Broad-Spectrum Antibacterial Potential Based on Mussel-Inspired Dendritic Polyglycerol and in Situ-Formed Copper Nanoparticles},
  series = {ACS applied materials \& interfaces},
  volume    = {9},
  journal   = {ACS applied materials \& interfaces},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1944-8244},
  doi       = {10.1021/acsami.7b10541},
  pages     = {35411 -- 35418},
  year      = {2017},
  abstract  = {A novel surface coating with durable broad-spectrum antibacterial ability was prepared based on mussel inspired dendritic polyglycerol (MI-dPG) embedded with copper nanoparticles (Cu NPs). The functional surface coating is fabricated via a facile dip-coating process followed by in situ reduction of copper ions with a MI-dPG coating to introduce Cu NPs into the coating matrix. This coating has been demonstrated to possess efficient long-term antibacterial properties against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and kanamycin-resistant E. coli through an "attract-kill-release" strategy. The synergistic antibacterial activity of the coating was shown by the combination of two functions of the contact killing, reactive oxygen species production and Cu ions released from the coating. Furthermore, this coating inhibited biofilm formation and showed good compatibility to eukaryotic cells. Thus, this newly developed Cu NP-incorporated MI-dPG surface coating may find potential application in the design of antimicrobial coating, such as implantable devices.},
  language  = {en}
}
@article{FangMaLietal.2017,
  author    = {Fang, Peng and Ma, Xingchen and Li, Xiangxin and Qiu, Xunlin and Gerhard, Reimund and Zhang, Xiaoqing and Li, Guanglin},
  title     = {Fabrication, Structure Characterization, and Performance Testing of Piezoelectret-Film Sensors for Recording Body Motion},
  series = {IEEE Sensors Journal},
  volume    = {18},
  journal   = {IEEE Sensors Journal},
  number    = {1},
  publisher = {Inst. of Electr. and Electronics Engineers},
  address   = {Piscataway},
  issn      = {1530-437X},
  doi       = {10.1109/JSEN.2017.2766663},
  pages     = {401 -- 412},
  year      = {2017},
  abstract  = {During muscle contractions, radial-force distributions are generated on muscle surfaces due to muscle-volume changes, from which the corresponding body motions can be recorded by means of so-called force myography (FMG). Piezo- or ferroelectrets are flexible piezoelectric materials with attractive materials and sensing properties. In addition to several other applications, they are suitable for detecting force variations by means of wearable devices. In this paper, we prepared piezoelectrets from cellular polypropylene films by optimizing the fabrication procedures, and developed an FMG-recording system based on piezoelectret sensors. Different hand and wrist movements were successfully detected on able-bodied subjects with the FMG system. The FMG patterns were evaluated and identified by means of linear discriminant analysis and artificial neural network algorithms, and average motion-classification accuracies of 96.1\% and 94.8\%, respectively, were obtained. This paper demonstrates the feasibility of using piezoelectret-film sensors for FMG and may thus lead to alternative methods for detecting body motion and to related applications, e.g., in biomedical engineering or structural-health monitoring.},
  language  = {en}
}
@article{LiXuWangetal.2017,
  author    = {Li, Zhengdong and Xu, Xun and Wang, Weiwei and Kratz, Karl and Sun, Xianlei and Zou, Jie and Deng, Zijun and Jung, Friedrich Wilhelm and Gossen, Manfred and Ma, Nan and Lendlein, Andreas},
  title     = {Modulation of the mesenchymal stem cell migration capacity via preconditioning with topographic microstructure},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {67},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-179208},
  pages     = {267 -- 278},
  year      = {2017},
  abstract  = {Controlling mesenchymal stem cells (MSCs) behavior is necessary to fully exploit their therapeutic potential. Various approaches are employed to effectively influence the migration capacity of MSCs. Here, topographic microstructures with different microscale roughness were created on polystyrene (PS) culture vessel surfaces as a feasible physical preconditioning strategy to modulate MSC migration. By analyzing trajectories of cells migrating after reseeding, we demonstrated that the mobilization velocity of human adipose derived mesenchymal stem cells (hADSCs) could be promoted by and persisted after brief preconditioning with the appropriate microtopography. Moreover, the elevated activation levels of focal adhesion kinase (FAK) and mitogen-activated protein kinase (MAPK) in hADSCs were also observed during and after the preconditioning process. These findings underline the potential enhancement of in vivo therapeutic efficacy in regenerative medicine via transplantation of topographic microstructure preconditioned stem cells.},
  language  = {en}
}
@article{ZouWangNeffeetal.2017,
  author    = {Zou, Jie and Wang, Weiwei and Neffe, Axel T. and Xu, Xun and Li, Zhengdong and Deng, Zijun and Sun, Xianlei and Ma, Nan and Lendlein, Andreas},
  title     = {Adipogenic differentiation of human adipose derived mesenchymal stem cells in 3D architectured gelatin based hydrogels (ArcGel)},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {67},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {3-4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-179210},
  pages     = {297 -- 307},
  year      = {2017},
  abstract  = {Polymeric matrices mimicking multiple functions of the ECM are expected to enable a material induced regeneration of tissues. Here, we investigated the adipogenic differentiation of human adipose derived mesenchymal stem cells (hADSCs) in a 3D architectured gelatin based hydrogel (ArcGel) prepared from gelatin and L-lysine diisocyanate ethyl ester (LDI) in an one-step process, in which the formation of an open porous morphology and the chemical network formation were integrated. The ArcGel was designed to support adipose tissue regeneration with its 3D porous structure, high cell biocompatibility, and mechanical properties compatible with human subcutaneous adipose tissue. The ArcGel could support initial cell adhesion and survival of hADSCs. Under static culture condition, the cells could migrate into the inner part of the scaffold with a depth of 840 +/- 120 mu m after 4 days, and distributed in the whole scaffold (2mm in thickness) within 14 days. The cells proliferated in the scaffold and the fold increase of cell number after 7 days of culture was 2.55 +/- 0.08. The apoptotic rate of hADSCs in the scaffold was similar to that of cells maintained on tissue culture plates. When cultured in adipogenic induction medium, the hADSCs in the scaffold differentiated into adipocytes with a high efficiency (93 +/- 1\%). Conclusively, this gelatin based 3D scaffold presented high cell compatibility for hADSC cultivation and differentiation, which could serve as a potential implant material in clinical applications for adipose tissue reparation and regeneration.},
  language  = {en}
}