@misc{ReusserBlumeSchaeflietal.2009, author = {Reusser, Dominik and Blume, Theresa and Schaefli, Bettina and Zehe, Erwin}, title = {Analysing the temporal dynamics of model performance for hydrological models}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-45114}, year = {2009}, abstract = {The temporal dynamics of hydrological model performance gives insights into errors that cannot be obtained from global performance measures assigning a single number to the fit of a simulated time series to an observed reference series. These errors can include errors in data, model parameters, or model structure. Dealing with a set of performance measures evaluated at a high temporal resolution implies analyzing and interpreting a high dimensional data set. This paper presents a method for such a hydrological model performance assessment with a high temporal resolution and illustrates its application for two very different rainfall-runoff modeling case studies. The first is the Wilde Weisseritz case study, a headwater catchment in the eastern Ore Mountains, simulated with the conceptual model WaSiM-ETH. The second is the Malalcahuello case study, a headwater catchment in the Chilean Andes, simulated with the physicsbased model Catflow. The proposed time-resolved performance assessment starts with the computation of a large set of classically used performance measures for a moving window. The key of the developed approach is a data-reduction method based on self-organizing maps (SOMs) and cluster analysis to classify the high-dimensional performance matrix. Synthetic peak errors are used to interpret the resulting error classes. The final outcome of the proposed method is a time series of the occurrence of dominant error types. For the two case studies analyzed here, 6 such error types have been identified. They show clear temporal patterns, which can lead to the identification of model structural errors.}, language = {en} } @article{BuergerReusserKneis2009, author = {B{\"u}rger, Gerd and Reusser, Dominik and Kneis, David}, title = {Early flood warnings from empirical (expanded) downscaling of the full ECMWF Ensemble Prediction System}, issn = {0043-1397}, doi = {10.1029/2009wr007779}, year = {2009}, language = {en} } @article{ReusserZehe2011, author = {Reusser, Dominik Edwin and Zehe, Erwin}, title = {Low-cost monitoring of snow height and thermal properties with inexpensive temperature sensors}, series = {Hydrological processes}, volume = {25}, journal = {Hydrological processes}, number = {12}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0885-6087}, doi = {10.1002/hyp.7937}, pages = {1841 -- 1852}, year = {2011}, abstract = {Small, self-recording temperature sensors were installed at several heights along a metal rod at five locations in a case study catchment. For each sensor, the presence or absence of snow cover was determined on the basis of its insulating effect and the resulting reduction of the diurnal temperature oscillations. Sensor coverage was then converted into a time series of snow height for each location. Additionally, cold content was calculated. Snow height and cold content provide valuable information for spring flood prediction. Good agreement of estimated snow heights with reference measurements was achieved and increased discharge in the study catchment coincided with low cold content of the snow cover. The results of the proposed distributed assessment of snow cover and snow state show great potential for (i) flood warning, (ii) assimilation of snow state data and (iii) modelling snowmelt process.}, language = {en} } @article{ReusserZehe2011, author = {Reusser, Dominik Edwin and Zehe, Erwin}, title = {Inferring model structural deficits by analyzing temporal dynamics of model performance and parameter sensitivity}, series = {Water resources research}, volume = {47}, journal = {Water resources research}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0043-1397}, doi = {10.1029/2010WR009946}, pages = {15}, year = {2011}, abstract = {In this paper we investigate the use of hydrological models as learning tools to help improve our understanding of the hydrological functioning of a catchment. With the model as a hypothetical conceptualization of how dominant hydrological processes contribute to catchment-scale response, we investigate three questions: (1) During which periods does the model (not) reproduce observed quantities and dynamics? (2) What is the nature of the error during times of bad model performance? (3) Which model components are responsible for this error? To investigate these questions, we combine a method for detecting repeating patterns of typical differences between model and observations (time series of grouped errors, TIGER) with a method for identifying the active model components during each simulation time step based on parameter sensitivity (temporal dynamics of parameter sensitivities, TEDPAS). The approach generates a time series of occurrence of dominant error types and time series of parameter sensitivities. A synoptic discussion of these time series highlights deficiencies in the assumptions about the functioning of the catchment. The approach is demonstrated for the Weisseritz headwater catchment in the eastern Ore Mountains. Our results indicate that the WaSiM-ETH complex grid-based model is not a sufficient working hypothesis for the functioning of the Weisseritz catchment and point toward future steps that can help improve our understanding of the catchment.}, language = {en} } @article{ReusserBuytaertZehe2011, author = {Reusser, Dominik Edwin and Buytaert, W. and Zehe, Erwin}, title = {Temporal dynamics of model parameter sensitivity for computationally expensive models with the Fourier amplitude sensitivity test}, series = {Water resources research}, volume = {47}, journal = {Water resources research}, number = {4}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0043-1397}, doi = {10.1029/2010WR009947}, pages = {14}, year = {2011}, abstract = {The quest for improved hydrological models is one of the big challenges in hydrology. When discrepancies are observed between simulated and measured discharge, it is essential to identify which algorithms may be responsible for poor model behavior. Particularly in complex hydrological models, different process representations may dominate at different moments and interact with each other, thus highly complicating this task. This paper investigates the analysis of the temporal dynamics of parameter sensitivity as a way to disentangle the simulation of a hydrological model and identify dominant parameterizations. Three existing methods (the Fourier amplitude sensitivity test, the extended Fourier amplitude sensitivity test, and Sobol's method) are compared by applying them to a TOPMODEL implementation in a small mountainous catchment in the tropics. For the major part of the simulation period, the three methods give comparable results, while the Fourier amplitude sensitivity test is much more computationally efficient. This method is also applied to the complex hydrological model WaSiM-ETH implemented in the Weisseritz catchment, Germany. A qualitative model validation was performed on the basis of the identification of relevant model components. The validation revealed that the saturation deficit parameterization of WaSiM-ETH is highly susceptible to parameter interaction and lack of identifiability. We conclude that temporal dynamics of model parameter sensitivity can be a powerful tool for hydrological model analysis, especially to identify parameter interaction as well as the dominant hydrological response modes. Finally, an open source implementation of the Fourier amplitude sensitivity test is provided.}, language = {en} } @article{BronstertCreutzfeldtGraeffetal.2012, author = {Bronstert, Axel and Creutzfeldt, Benjamin and Gr{\"a}ff, Thomas and Hajnsek, Irena and Heistermann, Maik and Itzerott, Sibylle and Jagdhuber, Thomas and Kneis, David and Lueck, Erika and Reusser, Dominik and Zehe, Erwin}, title = {Potentials and constraints of different types of soil moisture observations for flood simulations in headwater catchments}, series = {Natural hazards : journal of the International Society for the Prevention and Mitigation of Natural Hazards}, volume = {60}, journal = {Natural hazards : journal of the International Society for the Prevention and Mitigation of Natural Hazards}, number = {3}, publisher = {Springer}, address = {New York}, issn = {0921-030X}, doi = {10.1007/s11069-011-9874-9}, pages = {879 -- 914}, year = {2012}, abstract = {Flood generation in mountainous headwater catchments is governed by rainfall intensities, by the spatial distribution of rainfall and by the state of the catchment prior to the rainfall, e. g. by the spatial pattern of the soil moisture, groundwater conditions and possibly snow. The work presented here explores the limits and potentials of measuring soil moisture with different methods and in different scales and their potential use for flood simulation. These measurements were obtained in 2007 and 2008 within a comprehensive multi-scale experiment in the Weisseritz headwater catchment in the Ore-Mountains, Germany. The following technologies have been applied jointly thermogravimetric method, frequency domain reflectometry (FDR) sensors, spatial time domain reflectometry (STDR) cluster, ground-penetrating radar (GPR), airborne polarimetric synthetic aperture radar (polarimetric SAR) and advanced synthetic aperture radar (ASAR) based on the satellite Envisat. We present exemplary soil measurement results, with spatial scales ranging from point scale, via hillslope and field scale, to the catchment scale. Only the spatial TDR cluster was able to record continuous data. The other methods are limited to the date of over-flights (airplane and satellite) or measurement campaigns on the ground. For possible use in flood simulation, the observation of soil moisture at multiple scales has to be combined with suitable hydrological modelling, using the hydrological model WaSiM-ETH. Therefore, several simulation experiments have been conducted in order to test both the usability of the recorded soil moisture data and the suitability of a distributed hydrological model to make use of this information. The measurement results show that airborne-based and satellite-based systems in particular provide information on the near-surface spatial distribution. However, there are still a variety of limitations, such as the need for parallel ground measurements (Envisat ASAR), uncertainties in polarimetric decomposition techniques (polarimetric SAR), very limited information from remote sensing methods about vegetated surfaces and the non-availability of continuous measurements. The model experiments showed the importance of soil moisture as an initial condition for physically based flood modelling. However, the observed moisture data reflect the surface or near-surface soil moisture only. Hence, only saturated overland flow might be related to these data. Other flood generation processes influenced by catchment wetness in the subsurface such as subsurface storm flow or quick groundwater drainage cannot be assessed by these data. One has to acknowledge that, in spite of innovative measuring techniques on all spatial scales, soil moisture data for entire vegetated catchments are still today not operationally available. Therefore, observations of soil moisture should primarily be used to improve the quality of continuous, distributed hydrological catchment models that simulate the spatial distribution of moisture internally. Thus, when and where soil moisture data are available, they should be compared with their simulated equivalents in order to improve the parameter estimates and possibly the structure of the hydrological model.}, language = {en} } @article{GraeffZeheReusseretal.2009, author = {Gr{\"a}ff, Thomas and Zehe, Erwin and Reusser, Dominik and Lueck, Erika and Schroeder, Boris and Wenk, Gerald and John, Hermann and Bronstert, Axel}, title = {Process identification through rejection of model structures in a mid-mountainous rural catchment : observations of rainfall-runoff response, geophysical conditions and model inter-comparison}, issn = {0885-6087}, doi = {10.1002/Hyp.7171}, year = {2009}, abstract = {The intention of the presented study is to gain a better understanding of the mechanisms that caused the bimodal rainfall-runoff responses which occurred up to the mid-1970s regularly in the Schafertal catchment and vanished after the onset of mining activities. Understanding, this process is a first step to understanding the ongoing hydrological change in this area. It is hypothesized that either subsurface stormflow, or fast displacement of groundwater, could cause the second delayed peak. A top-down analysis of rainfall-runoff data, field observations as well as process modelling are combined within a rejectionistic framework. A statistical analysis is used to test whether different predictors. which characterize the forcing. near surface water content and deeper subsurface store, allow the prediction of the type of rainfall-runoff response. Regression analysis is used with generalized linear models Lis they can deal with non-Gaussian error distributions Lis well its a non-stationary variance. The analysis reveals that the dominant predictors are the pre-event discharge (proxy of state of the groundwater store) and the precipitation amount, In the field campaign, the subsurface at a representative hillslope was investigated by means of electrical resistivity tomography in order to identify possible strata as flow paths for subsurface stormflow. A low resistivity in approximately 4 in depth-either due to a less permeable layer or the groundwater surface-was detected. The former Could serve as a flow path for subsurface stormflow. Finally, the physical-based hydrological model CATFLOW and the groundwater model FEFLOW are compared with respect to their ability to reproduce the bimodal runoff responses. The groundwater model is able to reproduce the observations, although it uses only an abstract representation of the hillslopes. Process model analysis as well Lis statistical analysis strongly suggest that fast displacement of groundwater is the dominant process underlying the bimodal runoff reactions.}, language = {en} } @phdthesis{Reusser2011, author = {Reusser, Dominik Edwin}, title = {Combining smart model diagnostics and effective data collection for snow catchments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52574}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80\% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment.}, language = {en} } @misc{PradhanFischerVelthuizenetal.2015, author = {Pradhan, Prajal and Fischer, G{\"u}nther and Velthuizen, Harrij van and Reusser, Dominik Edwin and Kropp, J{\"u}rgen}, title = {Closing yield gaps}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {491}, issn = {1866-8372}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-408105}, pages = {18}, year = {2015}, abstract = {Global food production needs to be increased by 60-110\% between 2005 and 2050 to meet growing food and feed demand. Intensification and/or expansion of agriculture are the two main options available to meet the growing crop demands. Land conversion to expand cultivated land increases GHG emissions and impacts biodiversity and ecosystem services. Closing yield gaps to attain potential yields may be a viable option to increase the global crop production. Traditional methods of agricultural intensification often have negative externalities. Therefore, there is a need to explore location-specific methods of sustainable agricultural intensification. We identified regions where the achievement of potential crop calorie production on currently cultivated land will meet the present and future food demand based on scenario analyses considering population growth and changes in dietary habits. By closing yield gaps in the current irrigated and rain-fed cultivated land, about 24\% and 80\% more crop calories can respectively be produced compared to 2000. Most countries will reach food self-sufficiency or improve their current food self-sufficiency levels if potential crop production levels are achieved. As a novel approach, we defined specific input and agricultural management strategies required to achieve the potential production by overcoming biophysical and socioeconomic constraints causing yield gaps. The management strategies include: fertilizers, pesticides, advanced soil management, land improvement, management strategies coping with weather induced yield variability, and improving market accessibility. Finally, we estimated the required fertilizers (N, P2O5, and K2O) to attain the potential yields. Globally, N-fertilizer application needs to increase by 45-73\%, P2O5-fertilizer by 22-46\%, and K2O-fertilizer by 2-3 times compared to the year 2010 to attain potential crop production. The sustainability of such agricultural intensification largely depends on the way management strategies for closing yield gaps are chosen and implemented.}, language = {en} } @misc{FluschnikKriewaldRosetal.2017, author = {Fluschnik, Till and Kriewald, Steffen and Ros, Anselmo Garc{\´i}a Cant{\´u} and Zhou, Bin and Reusser, Dominik Edwin and Kropp, J{\"u}rgen and Rybski, Diego}, title = {The size distribution, scaling properties and spatial organization of urban clusters}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400486}, pages = {14}, year = {2017}, abstract = {Human development has far-reaching impacts on the surface of the globe. The transformation of natural land cover occurs in different forms, and urban growth is one of the most eminent transformative processes. We analyze global land cover data and extract cities as defined by maximally connected urban clusters. The analysis of the city size distribution for all cities on the globe confirms Zipf's law. Moreover, by investigating the percolation properties of the clustering of urban areas we assess the closeness to criticality for various countries. At the critical thresholds, the urban land cover of the countries undergoes a transition from separated clusters to a gigantic component on the country scale. We study the Zipf-exponents as a function of the closeness to percolation and find a systematic dependence, which could be the reason for deviating exponents reported in the literature. Moreover, we investigate the average size of the clusters as a function of the proximity to percolation and find country specific behavior. By relating the standard deviation and the average of cluster sizes—analogous to Taylor's law—we suggest an alternative way to identify the percolation transition. We calculate spatial correlations of the urban land cover and find long-range correlations. Finally, by relating the areas of cities with population figures we address the global aspect of the allometry of cities, finding an exponent δ ≈ 0.85, i.e., large cities have lower densities.}, language = {en} } @article{PradhanReusserKropp2013, author = {Pradhan, Prajal and Reusser, Dominik Edwin and Kropp, J{\"u}rgen}, title = {Embodied greenhouse gas emissions in Diets}, series = {PLoS one}, volume = {8}, journal = {PLoS one}, number = {5}, publisher = {PLoS}, address = {San Fransisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0062228}, pages = {8}, year = {2013}, abstract = {Changing food consumption patterns and associated greenhouse gas (GHG) emissions have been a matter of scientific debate for decades. The agricultural sector is one of the major GHG emitters and thus holds a large potential for climate change mitigation through optimal management and dietary changes. We assess this potential, project emissions, and investigate dietary patterns and their changes globally on a per country basis between 1961 and 2007. Sixteen representative and spatially differentiated patterns with a per capita calorie intake ranging from 1,870 to >3,400 kcal/day were derived. Detailed analyses show that low calorie diets are decreasing worldwide, while in parallel diet composition is changing as well: a discernable shift towards more balanced diets in developing countries can be observed and steps towards more meat rich diets as a typical characteristics in developed countries. Low calorie diets which are mainly observable in developing countries show a similar emission burden than moderate and high calorie diets. This can be explained by a less efficient calorie production per unit of GHG emissions in developing countries. Very high calorie diets are common in the developed world and exhibit high total per capita emissions of 3.7-6.1 kg CO2eq./day due to high carbon intensity and high intake of animal products. In case of an unbridled demographic growth and changing dietary patterns the projected emissions from agriculture will approach 20 Gt CO2eq./yr by 2050.}, language = {en} } @article{PradhanLuedekeReusseretal.2014, author = {Pradhan, Prajal and L{\"u}deke, Matthias K. B. and Reusser, Dominik Edwin and Kropp, J{\"u}rgen}, title = {Food self-sufficiency across scales: How local can we go?}, series = {Environmental science \& technology}, volume = {48}, journal = {Environmental science \& technology}, number = {16}, publisher = {American Chemical Society}, address = {Washington}, issn = {0013-936X}, doi = {10.1021/es5005939}, pages = {9463 -- 9470}, year = {2014}, abstract = {This study explores the potential for regions to shift to a local food supply using food self-sufficiency (FSS) as an indicator. We considered a region food self-sufficient when its total calorie production is enough to meet its demand. For future scenarios, we considered population growth, dietary changes, improved feed conversion efficiency, climate change, and crop yield increments. Starting at the 5' resolution, we investigated FSS from the lowest administrative levels to continents. Globally, about 1.9 billion people are self-sufficient within their 5' grid, while about 1 billion people from Asia and Africa require cross-continental agricultural trade in 2000. By closing yield gaps, these regions can achieve FSS, which also reduces international trade and increases a self-sufficient population in a 5' grid to 2.9 billion. The number of people depending on international trade will vary between 1.5 and 6 billion by 2050. Climate change may increase the need for international agricultural trade by 4\% to 16\%.}, language = {en} } @article{LissnerReusserScheweetal.2014, author = {Lissner, Tabea Katharina and Reusser, Dominik Edwin and Schewe, Jacob and Lakes, T. and Kropp, J{\"u}rgen}, title = {Climate impacts on human livelihoods: where uncertainty matters in projections of water availability}, series = {Earth system dynamics}, volume = {5}, journal = {Earth system dynamics}, number = {2}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {2190-4979}, doi = {10.5194/esd-5-355-2014}, pages = {355 -- 373}, year = {2014}, abstract = {Climate change will have adverse impacts on many different sectors of society, with manifold consequences for human livelihoods and well-being. However, a systematic method to quantify human well-being and livelihoods across sectors is so far unavailable, making it difficult to determine the extent of such impacts. Climate impact analyses are often limited to individual sectors (e.g. food or water) and employ sector-specific target measures, while systematic linkages to general livelihood conditions remain unexplored. Further, recent multi-model assessments have shown that uncertainties in projections of climate impacts deriving from climate and impact models, as well as greenhouse gas scenarios, are substantial, posing an additional challenge in linking climate impacts with livelihood conditions. This article first presents a methodology to consistently measure what is referred to here as AHEAD (Adequate Human livelihood conditions for wEll-being And Development). Based on a trans-disciplinary sample of concepts addressing human well-being and livelihoods, the approach measures the adequacy of conditions of 16 elements. We implement the method at global scale, using results from the Inter-Sectoral Impact Model Intercomparison Project (ISI-MIP) to show how changes in water availability affect the fulfilment of AHEAD at national resolution. In addition, AHEAD allows for the uncertainty of climate and impact model projections to be identified and differentiated. We show how the approach can help to put the substantial inter-model spread into the context of country-specific livelihood conditions by differentiating where the uncertainty about water scarcity is relevant with regard to livelihood conditions - and where it is not. The results indicate that livelihood conditions are compromised by water scarcity in 34 countries. However, more often, AHEAD fulfilment is limited through other elements. The analysis shows that the water-specific uncertainty ranges of the model output are outside relevant thresholds for AHEAD for 65 out of 111 countries, and therefore do not contribute to the overall uncertainty about climate change impacts on livelihoods. In 46 of the countries in the analysis, water-specific uncertainty is relevant to AHEAD. The AHEAD method presented here, together with first results, forms an important step towards making scientific results more applicable for policy decisions.}, language = {en} } @article{FluschnikKriewaldRosetal.2016, author = {Fluschnik, Till and Kriewald, Steffen and Ros, Anselmo Garcia Cantu and Zhou, Bin and Reusser, Dominik Edwin and Kropp, J{\"u}rgen and Rybski, Diego}, title = {The Size Distribution, Scaling Properties and Spatial Organization of Urban Clusters: A Global and Regional Percolation Perspective}, series = {ISPRS International Journal of Geo-Information}, volume = {5}, journal = {ISPRS International Journal of Geo-Information}, publisher = {MDPI}, address = {Basel}, issn = {2220-9964}, doi = {10.3390/ijgi5070110}, pages = {1543 -- 1559}, year = {2016}, abstract = {Human development has far-reaching impacts on the surface of the globe. The transformation of natural land cover occurs in different forms, and urban growth is one of the most eminent transformative processes. We analyze global land cover data and extract cities as defined by maximally connected urban clusters. The analysis of the city size distribution for all cities on the globe confirms Zipf's law. Moreover, by investigating the percolation properties of the clustering of urban areas we assess the closeness to criticality for various countries. At the critical thresholds, the urban land cover of the countries undergoes a transition from separated clusters to a gigantic component on the country scale. We study the Zipf-exponents as a function of the closeness to percolation and find a systematic dependence, which could be the reason for deviating exponents reported in the literature. Moreover, we investigate the average size of the clusters as a function of the proximity to percolation and find country specific behavior. By relating the standard deviation and the average of cluster sizes—analogous to Taylor's law—we suggest an alternative way to identify the percolation transition. We calculate spatial correlations of the urban land cover and find long-range correlations. Finally, by relating the areas of cities with population figures we address the global aspect of the allometry of cities, finding an exponent \&\#948; \&\#8776; 0.85, i.e., large cities have lower densities.}, language = {en} } @article{LandholmHolstenMartellozzoetal.2018, author = {Landholm, David M. and Holsten, Anne and Martellozzo, Federico and Reusser, Dominik Edwin and Kropp, J{\"u}rgen}, title = {Climate change mitigation potential of community-based initiatives in Europe}, series = {Regional environmental change}, volume = {19}, journal = {Regional environmental change}, number = {4}, publisher = {Springer}, address = {Heidelberg}, issn = {1436-3798}, doi = {10.1007/s10113-018-1428-1}, pages = {927 -- 938}, year = {2018}, abstract = {There is a growing recognition that a transition to a sustainable low-carbon society is urgently needed. This transition takes place at multiple and complementary scales, including bottom-up approaches such as community-based initiatives (CBIs). However, empirical research on CBIs has focused until now on anecdotal evidence and little work has been done to quantitatively assess their impact in terms of greenhouse gas (GHG) emissions. In this paper, we analyze 38 European initiatives across the food, energy, transport, and waste sectors to address the following questions: How can the GHG reduction potential of CBIs be quantified and analyzed in a systematic manner across different sectors? What is the GHG mitigation potential of CBIs and how does the reduction potential differ across domains? Through the comparison of the emission intensity arising from the goods and services the CBIs provide in relation to a business-as-usual scenario, we present the potential they have across different activities. This constitutes the foundational step to upscaling and further understanding their potential contribution to achieving climate change mitigation targets. Our findings indicate that energy generation through renewable sources, changes in personal transportation, and dietary change present by far the highest GHG mitigation activities analyzed, since they reduce the carbon footprint of CBI beneficiaries by 24\%, 11\%, and 7\%, respectively. In contrast, the potential for some activities, such as locally grown organic food, is limited. The service provided by these initiatives only reduces the carbon footprint by 0.1\%. Overall, although the proliferation of CBIs is very desirable from a climate change mitigation perspective it is necessary to stress that bottom-up initiatives present other important positive dimensions besides GHG mitigation. These initiatives also hold the potential of improving community resilience by strengthening local economies and enhancing social cohesion.}, language = {en} } @article{RybskiReusserWinzetal.2016, author = {Rybski, Diego and Reusser, Dominik Edwin and Winz, Anna-Lena and Fichtner, Christina and Sterzel, Till and Kropp, J{\"u}rgen}, title = {Cities as nuclei of sustainability?}, series = {Environment and Planning B: Urban Analytics and City Science}, volume = {44}, journal = {Environment and Planning B: Urban Analytics and City Science}, number = {3}, publisher = {Sage Publ.}, address = {London}, issn = {2399-8083}, doi = {10.1177/0265813516638340}, pages = {425 -- 440}, year = {2016}, abstract = {We have assembled CO2 emission figures from collections of urban GHG emission estimates published in peer-reviewed journals or reports from research institutes and non-governmental organizations. Analyzing the scaling with population size, we find that the exponent is development dependent with a transition from super- to sub-linear scaling. From the climate change mitigation point of view, the results suggest that urbanization is desirable in developed countries. Further, we compare this analysis with a second scaling relation, namely the fundamental allometry between city population and area, and propose that density might be a decisive quantity too. Last, we derive the theoretical country-wide urban emissions by integration and obtain a dependence on the size of the largest city.}, language = {en} }